| H220 SNR Adapter / Withdrawal Sleeve | Dimension H2:9.95 in; Dimension K :2-3/8 in; Housing Width:6.0 in; Maximum Speed:2520 rpm; Note:This product line wa; Support Type:Four-Bolt Plummer Bl; Dimension J2 :11-47/64 in; Dimension H :4-1/2 in; Series Type:Medium Series; Dimension J1 :13-13/64 in; |
| Spannhülse Withdrawal Sleeve H2313 konisch InnenØ 60mm Höhe 65mm | Dimension H2:9.95 in; Dimension K :2-3/8 in; Housing Width:6.0 in; Maximum Speed:2520 rpm; Note:This product line wa; Support Type:Four-Bolt Plummer Bl; Dimension J2 :11-47/64 in; Dimension H :4-1/2 in; Series Type:Medium Series; Dimension J1 :13-13/64 in; |
| Siemens 6ES7193-0CA30-0XA0 Interface Module | C0 - Static Radial Rating:10000 N; R - Inner Ring To Clear Radius2:1.0 mm; Limiting Speed (Oil):64400 rpm; Da - Outer Ring Backing Diameter:46.600 mm; Precision Class:ISO P4S (ABEC 7/9); do - Ball Diameter:10.318750 mm; Cage Type:CR - Phenolic Outer; Ball Type:STEEL; d:20 mm; da - Inner Ring Backing Diameter:29.900 mm; |
| H216 FBJ Adapter / Withdrawal Sleeve | Y1 - ISO Factor5:1.65; Design Units:Imperial; Cg - Geometry Factor7:0.0919; Y - ISO Factor1:1.47; r - Cup Frontface To Clear Radius2:0.06 in; Series:655; K - Factor3:1.43; C - Double Cup Width:3.0000 in; Y2 - ISO Factor6:2.46; Da - Cup Frontface Backing Diameter:5.57 in; |
| Hilco PH528-01-CG1 High Flow Filter Cartridge | Load Direction:Radial; Basic Dynamic Load Rating(N):12900; d:22; Types:16**/6*** series; Seal, Shield Symbols:LLB; Rolling Element Material:Steel; Type:Ball; Size Standards:Metric System; Precision:Grade 0; RoHS:6; |
| HOH2356 GP Adapter / Withdrawal Sleeve | Type:Bearings with Housin; Holder Surface Treatment:Electroless Nickel P; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:628; Flange Shape:Round Type; Days to Ship:7 Days; RoHS:6; Housing Material:1045 Carbon Steel; Seals:DD (Contact Rubber S; Width T(mm):25 ～ 50; |
| SKF Withdrawal Sleeve AHX 3122 | C0 - Static Radial Rating:10000 N; R - Inner Ring To Clear Radius2:1.0 mm; Limiting Speed (Oil):64400 rpm; Da - Outer Ring Backing Diameter:46.600 mm; Precision Class:ISO P4S (ABEC 7/9); do - Ball Diameter:10.318750 mm; Cage Type:CR - Phenolic Outer; Ball Type:STEEL; d:20 mm; da - Inner Ring Backing Diameter:29.900 mm; |
| AH24040 FAG Withdrawal sleeves AH240, main dimensions to DIN 5416, taper 1:30 | Bearing Number:MSE411BR; Dimension B:10.5 in; Shaft Size:4-11/16 in; Bearing UPC:013992039248; Maximum Speed:1600 rpm; Tensioning Unit Type:Tension Type; Ca - Axial Load Rating:8588 lbf; Seal Type:Viton Single Lip; Dimension P:1.0 in; Dimension R:2.0 in; |
| SKF AHX3226 G, AHX 3226 G Withdrawal Sleeve,125 mm Bore x 98 mm Long(FAG, NTN) | C1 - Dynamic Radial Rating (1 million revolutions)5:209000 N; Da - Cup Frontface Backing Diameter:125.00 mm; C - Cup Width:29.000 mm; db - Cone Backface Backing Diameter:96.01 mm; e - ISO Factor8:0.42; Cg - Geometry Factor:0.0856; Design Units:METRIC; Cup Part Number:Y33116M; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:38500 N; Db - Cup Backface Backing Diameter:119.13 mm; |
| AH24140 FAG Withdrawal sleeves AH241, main dimensions to DIN 5416, taper 1:30 | r - Cup Backface To Clear Radius1:4 mm; Design Units:METRIC; Series:30236; D:320 mm; C - Cup Width:43 mm; G2 - Heat Generation Factor (Rib-Roller End):100.2; Y - ISO Factor4:1.33; G1 - Heat Generation Factor (Roller-Raceway):676.6; e - ISO Factor3:0.45; Cup Part Number:Y30236M; |