AH1680T Oil/Wind Cooler | ra1 (max):1 mm; d:60 mm; Dynamic Load Rating:40,000 N; db (min):66 mm; Db (min):90 mm; Limiting Speed - Grease:6,700 rpm; Fillet Radius/Chamfer:1.1 mm; Limiting Speed - Oil:8,500 rpm; dc (min):71 mm; Db (max):86.5 mm; |
AH1215-CA3 Hydraulic Oil Air Coolers | D:460.000 mm; C0 - Static Radial Rating:1950000 N; r - Outer Ring To Clear Radius5:4.000 mm; Tapered Bore:N; Reference Thermal Speed Rating (Grease):560; B - Outer Ring Width:65.000 mm; Cg - Geometry Factor3:0.1808; Da - Outer Ring Backing Diameter:442.000 mm; C - Inner Ring Width:57.560 mm; Design Units:METRIC; |
Sumitomo QT6253-125-50F Double Gear Pump | H2:35.0 mm; Seal Type:Double Lip; Jmax:295 mm; Max Oil Speed:4300; Max Grease Speed:3600; Cage Type:EJ; Jmin:285 mm; UPC Code:999999999; Locating Rings (width x OD):SR160X14; Locknut:KM15; |
FLJ Series 130FLJ0 AC Centrifugal Blower/Fan | D:460.000 mm; C0 - Static Radial Rating:1950000 N; r - Outer Ring To Clear Radius5:4.000 mm; Tapered Bore:N; Reference Thermal Speed Rating (Grease):560; B - Outer Ring Width:65.000 mm; Cg - Geometry Factor3:0.1808; Da - Outer Ring Backing Diameter:442.000 mm; C - Inner Ring Width:57.560 mm; Design Units:METRIC; |
DT-649 Oil Cooler | Da (max):466 mm; d:360 mm; da (min):374 mm; Axial Load Factor Y1:4.05; D:480 mm; Axial Load Factor Y2:6.03; Enclosure:Open; Limiting Speed - Oil:1,100 rpm; ra (max):2.5 mm; Hole Diameter (do):10 mm; |
DT-531 Oil Cooler | Dimension M:2.59 in; Oil Lubrication - T Seal:2400 rpm; Dimension F:3.00 in; Pre Install Clearance Max:0.0039 in; C0 - Static Load:87200 lb; Y1 - Geometry Factor:2.90; Dimension G:3.00 in; Engineering Group:Mounted Bearing; Oil Lubrication - B/C/O Seal:1000 rpm; Eng Internal Radial Clearance - Max:0.0039; |
AH2342A-CA3 Hydraulic Oil Air Coolers | Bearing Inner Dia. Shape:Tapered hole adapter; Grease Type:Standard Grease; Bearing Unit, Type:Square flange shape; Machining:No; d:30; Unit Body Material:Cast Iron; RoHS:6; Accessory:No Cover; |
DT-10285-F-B Oil Cooler | Flange Shape:Compact Type; Flange O.D. H(φ):72; Number of Bearings:Double; Seals:DD (Contact Rubber S; Housing Material:[Aluminum Alloy] 201; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; |
DT-311 Oil Cooler | Bearing Inner Dia. Shape:Tapered hole adapter; Grease Type:Standard Grease; Bearing Unit, Type:Square flange shape; Machining:No; d:30; Unit Body Material:Cast Iron; RoHS:6; Accessory:No Cover; |
GLC、GLL series tubular oil cooler GLC5-51 | Surface Treatment:No; Machining:No; Diameter series symbol:Used for Light load; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; Unit, Type:Insert Bearing Unit; Seal:Nitrile; Fit:J7; Stroke:No; |