SKF SAFS 22536 x 6.1/2 T SAF and SAW pillow blocks with bearings on an adapter sleeve	d:6 mm; operating temperature range:120° to 248°; D:19 mm; dynamic load capacity:2224; B:6 mm; static load capacity:894 lbs; bore type:Round; finish/coating:Uncoated; closure type:Double Shielded; cage material:Carbon Steel; row type & fill slot:Single Row Non-Fill Slot; maximum rpm:46000 RPM; snap ring included:Without Snap Ring; Weight:0.020 lb;
SKF SNL 3056 ATURT Split plummer block housings, large SNL series for bearings on an adapter sleeve, with oil seals	Category:Pillow Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:22.246; Product Group:M06288; Number of Mounting Holes:2; Mounting Method:Eccentric Collar; Housing Style:2 Bolt Pillow Block; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Non-expansion; Mounting Bolts:1 Inch; Relubricatable:Yes; Insert Part Number:22220; Seals:Triple Lip Nitrile Rubber;
SKF SNL 3140 Split plummer block housings, large SNL series for bearings on an adapter sleeve, with standard seals	G2 - Heat Generation Factor (Rib-Roller End):9.4; Cup Part Number:14276; R - Cone Backface To Clear Radius1:3.560 mm; Cage Type:Stamped Steel; r - Cup Backface To Clear Radius2:1.27 mm; da - Cone Frontface Backing Diameter:38.61 mm; Db - Cup Backface Backing Diameter:59.94 mm; a - Effective Center Location3:-4.3 mm; B:19.845 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2080 lbf;
SKF SAF 22226 TLC SAF and SAW pillow blocks with bearings with a cylindrical bore	Category:Flange Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:12.712; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:Concentric Collar; Housing Style:4 Bolt Round Flange Block; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Non-expansion; Mounting Bolts:20 Millimeter; Relubricatable:Yes; Insert Part Number:22215; Seals:Teflon Labyrinth;
SKF SNL 516-613 Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals	Machining:No; Bearing Unit, Type:Pillow Type; Rolling Element Material:Bearing Steel; d:90; Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Tapered hole adapter; RoHS:6;
SKF SE 208-307 Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals	Category:Flange Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:14.528; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:V Lock; Housing Style:4 Bolt Round Flange Cartridge; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Non-expansion; Mounting Bolts:3/4 Inch; Relubricatable:Yes; Insert Part Number:22219; Seals:Triple Lip Viton;
SKF SNL 3196 G Split plummer block housings, large SNL series for bearings on a cylindrical seat, with standard seals	Support Type:Two-Bolt Plummer Blo; Series Type:Light Series; Maximum Speed:1740 rpm; Shaft Size:4-15/16 in; Dimension L:500 mm; Dimension H:150 mm; Note:This product line wa; Bearing Type:Split Cylindrical Ex; Cr - Dynamic Load Rating:81606 lbf; Dimension M:150 mm;
SKF SAF 22513 x 2.1/8 T SAF and SAW pillow blocks with bearings on an adapter sleeve	Category:Take Up Units; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:6.81; Product Group:M06288; Component Description:Take Up Bearing Only; Rolling Element:Spherical Roller Bearing; Housing Style:Unit Only; Mounting Method:Eccentric Collar; Compatible Take Up Frame:QMTF; Adjustment Travel Length:0; Insert Part Number:22210; Housing Material:Cast Steel; Other Features:Double Row | Expansion | Two Lip Viton Seal | Steel Cage;
SKF SONL 224-524 Split plummer block housings, SONL series for bearings on a cylindrical seat	Support Type:Four-Bolt Plummer Bl; Dimension H2:13.1 in; Dimension K :3-1/4 in; Housing Width:6.4 in; Dimension M :5-1/8 in; Note:This product line wa; Bolt Size:4 x 7/8; Seal Type:Aluminium Triple Lab; Bearing Type:Split Cylindrical Re; Dimension J2 :14-1/2 in;
SKF SONL 217-517 Split plummer block housings, SONL series for bearings on an adapter sleeve	Flange O.D. H(φ):34; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Number of Bearings:Double; Bearing I.D. d(mm):8; Type:Bearings with Housin; Bearing Retained:No; Width T(mm):20 ～ 30;