SKF FSE 511-609 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals	Category:Flange Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:9.988; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:V Lock; Housing Style:4 Bolt Round Flange Cartridge; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Expansion; Mounting Bolts:5/8 Inch; Relubricatable:Yes; Insert Part Number:22216; Seals:Double Lip Viton; Housing Configuration:1 Piece Solid;
SKF SAF 22626 x 4.3/8 SAF and SAW pillow blocks with bearings on an adapter sleeve	Category:Pillow Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:10.442; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:V Lock; Housing Style:4 Bolt Pillow Block; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Expansion; Mounting Bolts:3/4 Inch; Relubricatable:Yes; Insert Part Number:22216; Seals:Triple Lip Nitrile Rubber; Housing Configuration:1 Piece Solid;
SKF SE 507-606 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals	d:2.1875 in; overall length:6-3/4 in; slot spacing:5.1250 in; overall height:5-3/4 in; slot width:0.6875 in; lubrication type:Lubrication Fitting; unit type:Side Mount; maximum rpm:1400 RPM; housing material:Cast Iron; dynamic load capacity:9752 lb; locking device:Set Screw; expansion type:Non-Expansion Bearing (Fixed); seal type:Felt; B:2-1/4 in; finish/coating:Uncoated; rod hole diameter:1-3/8 in;
SKF SNL 206-305 Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals	Category:Flange Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:11.35; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:Tapered Adapter Sleeve; Housing Style:4 Bolt Square Flange Cartridge; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Expansion; Mounting Bolts:5/8 Inch; Relubricatable:Yes; Insert Part Number:22215; Seals:Triple Lip Urethane;
SKF SAF 22511 x 1.7/8 T SAF and SAW pillow blocks with bearings on an adapter sleeve	Bearing number:NNCF4860-V; Size (mm):300x356.7x80; Bore Diameter (mm):300; Outer Diameter (mm):356,7; Width (mm):80; d:300 mm; D:380 mm; E:356,7 mm; B:80 mm; C:80 mm; d1:330,5 mm; r1 min.:2,1 mm; r2 min.:2,1 mm; r3 min.:2,1 mm; r4 min.:2,1 mm; D1:348,5 mm; S:6 mm; Weight:22,5 Kg; Basic dynamic load rating (C):805 kN; Basic static load rating (C0):2159 kN;
SKF SNL 528 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals	Flange O.D. H(φ):34; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Number of Bearings:Double; Bearing I.D. d(mm):8; Type:Bearings with Housin; Bearing Retained:No; Width T(mm):20 ～ 30;
SKF SNL 517 Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals	G2 - Heat Generation Factor (Rib-Roller End):9.4; Cup Part Number:14276; R - Cone Backface To Clear Radius1:3.560 mm; Cage Type:Stamped Steel; r - Cup Backface To Clear Radius2:1.27 mm; da - Cone Frontface Backing Diameter:38.61 mm; Db - Cup Backface Backing Diameter:59.94 mm; a - Effective Center Location3:-4.3 mm; B:19.845 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2080 lbf;
SKF SNL 520-617 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals	Y1 - Geometry Factor:2.79; Dimension L:3.58 in; Dimension D Min:7.72 in; Oil Lubrication - T Seal:3200 rpm; e - Geometry Factor:0.24; Grease Lubrication - T Seal:2800 rpm; Dimension A:3.15 in; UPC Code:0883450097024; Locking Style:Eccentric; Dimension F:10.83 in;
SKF SNL 3156 TURA Split plummer block housings, large SNL series for bearings on an adapter sleeve, with oil seals	Support Type:Four-Bolt Plummer Bl; Dimension H2:13.1 in; Dimension K :3-1/4 in; Housing Width:6.4 in; Dimension M :5-1/8 in; Note:This product line wa; Bolt Size:4 x 7/8; Seal Type:Aluminium Triple Lab; Bearing Type:Split Cylindrical Re; Dimension J2 :14-1/2 in;
SKF SNL 530 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals	RoHS:6; Flange O.D. H(φ):96; Width T(mm):55 ～ 80; Flange Shape:Compact Type; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing I.D. d(mm):30; Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel;