SKF SNL 524-620 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals	Da - Cup Frontface Backing Diameter:1089.91 mm; Cg - Geometry Factor:0.387; da - Cone Frontface Backing Diameter:927.10 mm; C0 - Static Radial Rating:1740000 lbf; Aa - Cage-Cone Backface Clearance:20.57 mm; Cup Part Number:158442; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:167000 lbf; R - Cone Backface To Clear Radius1:19.050 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:655000 lbf;
SKF FSNL 516-613 Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals	Bearing number:6315LU; Size (mm):75x160x37; Bore Diameter (mm):75,000; Outer Diameter (mm):160,000; Width (mm):37,000; d:75,000 mm; D:160,000 mm; B:37,000 mm; C:37,000 mm; rs min:2.1 mm; Radial clearance class:CN; Mass:3.02 kg; Dynamic load, C:113 kN; Static load, C0:77 kN; Fatigue limit load, Cu:3.25 kN; f0:13.2; Nlim (grease):2,900 rpm; Min operating temperature, Tmin:-25 °C; Max operating temperature, Tmax:110 °C;
SKF SSAFS 22224 T SAF and SAW pillow blocks with bearings with a cylindrical bore	Series Type:Light Series; Seal Type:Viton Single Lip; Cor - Static Load Rating:19643 lbf; Dimension J2 :7-3/8 in; Cr - Dynamic Load Rating:18694 lbf; Dimension L :9-5/8 in; Bearing Number:LSE115BX; Bolt Size:2 x 5/8; Support Type:Two-Bolt Plummer Blo; Dimension H :2-3/4 in;
SKF FSNL 517 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals	Category:Flange Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:6.81; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:Tapered Adapter Sleeve; Housing Style:4 Bolt Round Flange Cartridge; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Expansion; Mounting Bolts:10 Millimeter; Relubricatable:Yes; Insert Part Number:22209; Seals:Triple Lip Urethane;
SKF SONL 218-518 Split plummer block housings, SONL series for bearings on a cylindrical seat	G2 - Heat Generation Factor (Rib-Roller End):9.4; Cup Part Number:14276; R - Cone Backface To Clear Radius1:3.560 mm; Cage Type:Stamped Steel; r - Cup Backface To Clear Radius2:1.27 mm; da - Cone Frontface Backing Diameter:38.61 mm; Db - Cup Backface Backing Diameter:59.94 mm; a - Effective Center Location3:-4.3 mm; B:19.845 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2080 lbf;
SKF SSAFS 22515 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve	Da - Cup Frontface Backing Diameter:1089.91 mm; Cg - Geometry Factor:0.387; da - Cone Frontface Backing Diameter:927.10 mm; C0 - Static Radial Rating:1740000 lbf; Aa - Cage-Cone Backface Clearance:20.57 mm; Cup Part Number:158442; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:167000 lbf; R - Cone Backface To Clear Radius1:19.050 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:655000 lbf;
SKF SAF 22530 x 5.1/4 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve	Category:Pillow Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:8.626; Product Group:M06288; Number of Mounting Holes:2; Mounting Method:V Lock; Housing Style:2 Bolt Pillow Block; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Expansion; Mounting Bolts:3/4 Inch; Relubricatable:Yes; Insert Part Number:22214; Seals:Triple Lip Urethane; Housing Configuration:1 Piece Solid;
SKF SE 515-612 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals	Category:Mounted Units & Inserts; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:2.452; Product Group:M06288;
SKF FSAF 22516 x 2.5/8 T SAF and SAW pillow blocks with bearings on an adapter sleeve	d:140 mm; internal clearance:C2; D:210 mm; cage material:Steel Cage; B:69 mm; manufacturer upc number:087796032101; bore type:Straight;
SKF SNL 518-615 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals	Flange O.D. H(φ):34; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Number of Bearings:Double; Bearing I.D. d(mm):8; Type:Bearings with Housin; Bearing Retained:No; Width T(mm):20 ～ 30;