| SKF FSAF 22611 x 2 T SAF and SAW pillow blocks with bearings on an adapter sleeve | roller diameter:3.2500 in; head type:Slotted; roller width:1.7500 in; thread size:1-1/4-12; stud diameter:1.2500 in; radial dynamic load capacity:15720 lbs; stud length:2.5000 in; radial static load capacity:18000 lbs; roller shape:Flat; maximum rpm:880 rpm; roller material:Chrome Steel; lubrication hole location:Head, Stud Side; bearing element:Needle Rollers; finish/coating:Black Oxide; stud type:Standard; |
| SKF SNL 520-617 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals | Y1 - Geometry Factor:2.79; Dimension L:3.58 in; Dimension D Min:7.72 in; Oil Lubrication - T Seal:3200 rpm; e - Geometry Factor:0.24; Grease Lubrication - T Seal:2800 rpm; Dimension A:3.15 in; UPC Code:0883450097024; Locking Style:Eccentric; Dimension F:10.83 in; |
| SKF FSNL 518-615 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals | Category:Mounted Units & Inserts; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:0; Product Group:M06288; Design Unit:METRIC; Bore Taper:1/12; Bearing Weight:47.600 Kg; Cage Type:EMB; UPC Code:087796028418; Cage Material:Brass; Superseded Part:23052KYMBW507C08C4; d - Bore:260 mm; D - Outer Diameter:400.000 mm; B - Inner Ring Width:104 mm; B - Outer Ring Width:104.000 mm; R - Inner Ring To Clear Radius1:3.0 mm; |
| SKF SONL 238-538 Split plummer block housings, SONL series for bearings on an adapter sleeve | G2 - Heat Generation Factor (Rib-Roller End):9.4; Cup Part Number:14276; R - Cone Backface To Clear Radius1:3.560 mm; Cage Type:Stamped Steel; r - Cup Backface To Clear Radius2:1.27 mm; da - Cone Frontface Backing Diameter:38.61 mm; Db - Cup Backface Backing Diameter:59.94 mm; a - Effective Center Location3:-4.3 mm; B:19.845 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2080 lbf; |
| SKF SAFS 22530 x 5.3/8 T SAF and SAW pillow blocks with bearings on an adapter sleeve | Category:Pillow Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:7.264; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:V Lock; Housing Style:4 Bolt Pillow Block; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Non-expansion; Mounting Bolts:5/8 Inch; Relubricatable:Yes; Insert Part Number:22211; Seals:Double Lip Viton; Housing Configuration:1 Piece Solid; |
| SKF SNL 522-619 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals | Thickness T(mm):40 ～ 50; Height H(mm):40 ～ 60; C Chamfered:Not Provided; Lateral Width L(mm):82; Bearing I.D. d(mm):20; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; RoHS:6; Shape:T-Shaped; |
| SKF SNL 3038 Split plummer block housings, large SNL series for bearings on an adapter sleeve, with standard seals | SKU:2mm9108wicrsum-timken; Availability:In Stock; Weight:0.19 KGS; d:40mm; D:68mm; B:15mm; Dynamic Load Rating (kN):14.9; Static Load Rating (kN):21.9; Speed Rating (r/min):19900; Cage Type:Plastic; Seals or Shields:Open Type; Clearance:Standard; |
| SKF SNL 518-615 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals | Y1 - Geometry Factor:2.79; Dimension L:3.58 in; Dimension D Min:7.72 in; Oil Lubrication - T Seal:3200 rpm; e - Geometry Factor:0.24; Grease Lubrication - T Seal:2800 rpm; Dimension A:3.15 in; UPC Code:0883450097024; Locking Style:Eccentric; Dimension F:10.83 in; |
| SKF SAF 22530 x 5.5/16 SAF and SAW pillow blocks with bearings on an adapter sleeve | Category:Flange Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:8.626; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:V Lock; Housing Style:4 Bolt Round Flange Block; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Non-expansion; Mounting Bolts:5/8 Inch; Relubricatable:Yes; Insert Part Number:22214; Seals:Triple Lip Urethane; |
| SKF SAW 23532 x 5.3/8 SAF and SAW pillow blocks with bearings on an adapter sleeve | Category:Take Up Units; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:13.62; Product Group:M06288; Component Description:Take Up Bearing Only; Rolling Element:Spherical Roller Bearing; Housing Style:Unit Only; Mounting Method:Concentric Collar; Compatible Take Up Frame:QMTF; Adjustment Travel Length:0; Insert Part Number:22215; Housing Material:Cast Steel; Other Features:Double Row | Double Collar | Expansion | Three Lip Nitrile Rubber Seal | Steel Cage | With Set Screw; |