SKF SAF 1613 x 2.1/8 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve	Category:Pillow Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:13.166; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:Concentric Collar; Housing Style:4 Bolt Pillow Block; Rolling Element:Tapered Roller Bearing; Housing Material:Cast Iron; Expansion / Non-expansion:Expansion; Mounting Bolts:5/8 Inch; Relubricatable:Yes; Insert Part Number:S1U-EXL-204R; Seals:Triple Lip Contact;
SKF SAW 23544 x 7.7/8 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve	Bearing number:7211; Size (mm):55x100x21; Bore Diameter (mm):55; Outer Diameter (mm):100; Width (mm):21; d:55 mm; D:100 mm; B:21 mm; C:21 mm; Angle (α):30 °; a:33.3 mm; r min.:1.5 mm; r1 min.:1 mm; da min.:63.5 mm; Da max.:91.5 mm; ra max.:1.5 mm; Weight:0.635 Kg; (Grease) Lubrication Speed:7600 r/min; Bearing No.:7211; r(min):1.5; r1(min):1; Cr:63.7; C0r:39.8; Cu:2.45; f0:-; Grease lub.:6000;
SKF FSAF 23024 KAT x 4.3/16 SAF and SAW pillow blocks with bearings on an adapter sleeve	d:55 mm; operating temperature range:-65 to +392 °F; D:100 mm; cage material:Steel Cage; B:25 mm; bearing material:Chrome Steel; bore type:Straight; cage type:Two-Piece; outer ring type:Not Split; precision rating:Not Rated; internal clearance:C3; finish/coating:Uncoated; closure type:Open; outer ring width:25 mm; lubrication hole type:Lubrication Groove & Hole; fillet radius:1.5 mm; dynamic load capacity:31400 lbf;
SKF SAF 22218 TLC SAF and SAW pillow blocks with bearings with a cylindrical bore	Category:Mounted Units & Inserts; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:46.266; Product Group:M06288;
SKF SAF 22332 SAF and SAW pillow blocks with bearings with a cylindrical bore	Category:Pillow Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:7.718; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:Concentric Collar; Housing Style:4 Bolt Pillow Block; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Expansion; Mounting Bolts:5/8 Inch; Relubricatable:Yes; Insert Part Number:22213; Seals:Triple Lip Urethane;
SKF SAFS 23044 KAT x 7.7/8 SAF and SAW pillow blocks with bearings on an adapter sleeve	Category:Bearings; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:0; Product Group:M06110; d:30 mm; D:62 mm; B1:35.7 mm; B:23.8 mm; C:18 mm; d1 ≈:39.7 mm; d2:44.1 mm; B4:5.95 mm; r1,2 min.:0.6 mm; s1:26.7 mm; Basic dynamic load rating C:19.5 kN; Basic static load rating C0:11.2 kN; Fatigue load limit Pu:0.475 kN; Limiting speed1):6300 r/min; Calculation factor f0:14; Mass complete bearing:0.32 kg;
SKF SNLN 3028 SNLN 30 plummer block housings for bearings with a cylindrical bore	Series Type:Light Series; Seal Type:Viton Single Lip; Cor - Static Load Rating:19643 lbf; Dimension J2 :7-3/8 in; Cr - Dynamic Load Rating:18694 lbf; Dimension L :9-5/8 in; Bearing Number:LSE115BX; Bolt Size:2 x 5/8; Support Type:Two-Bolt Plummer Blo; Dimension H :2-3/4 in;
SKF FSAF 22311 SAF and SAW pillow blocks with bearings with a cylindrical bore	Category:Flange Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:0.503; Product Group:M06110; Number of Mounting Holes:2; Mounting Method:Set Screw; Housing Style:2 Bolt Flange Block; Rolling Element:Ball Bearing; Housing Material:Polymer; Expansion / Non-expansion:Non-expansion; Mounting Bolts:3/8 Inch; Relubricatable:Yes; Insert Part Number:INS-SC-103-FF; Seals:Single Lip Contact; Housing Configuration:1 Piece Solid;
SKF SAF 22507 x 1.1/4 SAF and SAW pillow blocks with bearings on an adapter sleeve	Category:Pillow Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:8.626; Product Group:M06288; Number of Mounting Holes:2; Mounting Method:V Lock; Housing Style:2 Bolt Pillow Block; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Expansion; Mounting Bolts:3/4 Inch; Relubricatable:Yes; Insert Part Number:22214; Seals:Triple Lip Urethane; Housing Configuration:1 Piece Solid;
SKF FSAF 22611 T SAF and SAW pillow blocks with bearings on an adapter sleeve	Category:Take Up Units; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:1.82; Product Group:M06110; Component Description:Take Up Unit with Frame; Rolling Element:Ball Bearing; Housing Style:Bottom Track Only; Mounting Method:Set Screw; Compatible Take Up Frame:NT; Adjustment Travel Length:6; Insert Part Number:UG215NL; Housing Material:Cast Iron; Other Features:Single Row | Spherical | Standard Duty | Wide Inner Race | Light Duty Conveyor Type | Welded Channel Frame | One Lip Seal;