| TOKIME piston pump P70V3R-2BGVF-10-S-140-J | Inner/Outer Ring Material:Steel; Precision:Grade 0; d:15; Outer Ring Shape:Flat; Specifications, Environment:Standard; Retainer Type:Punching; Bearing type symbol:No; RoHS:6; Special Configurations Code:No; |
| TOKIME piston pump P21V-RSG-11-CMC-10-J | Shape:L-Shaped; Type:Bearings with Housin; Bearing Part Number:608; Height Indication:Height Configurable; Height H(mm):20 ～ 30; Days to Ship:8 Days; Holder Surface Treatment:Black Oxide Coating; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; |
| TOKIME piston pump P16V-FR-20-CC-21-J | r - Cup Backface To Clear Radius1:0.130 in; Cup Part Number:66462-B; e - ISO Factor3:0.63; C1 - Cup Flange Width:0.2500 in; D1 - Flange Outer Diameter:4.8750 in; C - Cup Width:0.9375 in; D:4.6250 in; Cg - Geometry Factor5:0.0751; Design Units:Imperial; Y - ISO Factor4:0.96; |
| TOKIME piston pump P100VR-11-CG-10-J | Shaft Tolerance:0.0015 in; Dimension D Min:6.81 in; Dimension R:0.21 in; Dimension H:1.38 in; Dimension A:2.75 in; Dimension J (Bolt Size):0.625 in; Shaft Size :65 mm; Eng Internal Radial Clearance - Min:0.0016; Dimension K:1.24 in; Oil Lubrication - T Seal:3200 rpm; |
| TOKIME piston pump P21V-FLS-11-CCG-10-J | Material:52100 Steel; Size Unit:Inch; Diameter(inch):2; Days to Ship:6 Days; |
| TOKIME piston pump P16V-FR-20-CC-21-J | Bolt Hole Spacing J:117.5 mm; Static Load Rating:2530 lbf; Dimension T:0.783 in; Dimension L1:52.4 mm; Base to Center Height H:42.86 mm; Total Width A:1.563 in; Dimension D1:1.579 in; Series:Standard; Housing Style:Two-Bolt Pillow Bloc; Bolt Hole Length N1:23.8 mm; |
| TOKIME piston pump P130V-RS-11-CMC-10-J | Bolt Hole Spacing J:117.5 mm; Static Load Rating:2530 lbf; Dimension T:0.783 in; Dimension L1:52.4 mm; Base to Center Height H:42.86 mm; Total Width A:1.563 in; Dimension D1:1.579 in; Series:Standard; Housing Style:Two-Bolt Pillow Bloc; Bolt Hole Length N1:23.8 mm; |
| TOKIME piston pump P21V-FRS-11-CMC-10-J | Basic Load Rating Cor (Static)(kN):15.6; Roller Follower Type:Non-Separate; Roller Type:Crowned Type; D:24; Volume Discount:Available; Category:Roller Follower; Shaft:None; Days to Ship:6 Days; Allowable Rotational Speed(rpm):7000; Material:[Stainless Steel] 44; |
| TOKIME piston pump P16V-RS-11-CMC-10-J | Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing Part Number:6201; Number of Bearings:Double; RoHS:6; Width T(mm):30 ～ 70; Bearing Retained:Yes (with retaining; Bearing I.D. d(mm):12; Holder Surface Treatment:Clear Anodize; |
| TOKIME piston pump P31VR-11-CVC-10-J | Inner/Outer Ring Material:Steel; Precision:Grade 0; d:15; Outer Ring Shape:Flat; Specifications, Environment:Standard; Retainer Type:Punching; Bearing type symbol:No; RoHS:6; Special Configurations Code:No; |