| Oil and Gas Equipment Bearings 7602-0212-90 | Oil Reference Speed:38000 rpm; Outside Ring Width B:8.000 mm; Snap Ring Diameter D2 max:29.200 mm; Outside Diameter D:26.000 mm; Grease Reference Speed:26000 rpm; Weight:0.02 Kg; Snap Ring Width f max:0.700 mm; C0r - Static Load Rating:2 kN; Clearance:C0 (Normal); Cr - Dynamic Load Rating:4.6 kN; |
| Oil and Gas Equipment Bearings AD5144 | Bore Size d:60 mm; Clearance:C0 (Normal); Weight:2.730 Kg; Outside Ring Width B:35.000 mm; Cr - Dynamic Load Rating:109 kN; C0r - Static Load Rating:70.1 kN; Grease Reference Speed:6000 rpm; Radius Rs min:2.100 mm; Oil Reference Speed:8600 rpm; Features:O.D. Groove; |
| Oil and Gas Equipment Bearings AD-5144 | Dimension S1:23.4 mm; Dynamic Load Rating:2380 lbf; Material:Bearing Steel; Center of Bearing from End S:13.9 mm; Shaft Size d:5/8 in; Weight:0.50 lb; Series:Industrial; Static Load Rating:1070 lbf; Set Screw Size:1/4-20; Lubrication Type:Non-Relubricatable; |
| Oil and Gas Equipment Bearings O-1559-C | B:79.4; Machining:No; Fit:J7; Grease Type:SH44M; Unit Body Material:Cast Iron; Stroke:No; d:70; Basic Load Rating, Dynamic Rating(N):62200; Seal:Silicone; Bearing Unit, Type:Pillow Type; |
| Oil and Gas Equipment Bearings IB-731 | D:12.25 in; C - Cup Width:2.5000 in; Cup Part Number:219122; Da - Cup Frontface Backing Diameter:11.11 in; Cg - Geometry Factor:0.129; e - ISO Factor2:0.38; Series:219000; Y - ISO Factor3:1.59; Db - Cup Backface Backing Diameter:10.83 in; Design Units:Imperial; |
| Oil and Gas Equipment Bearings N-2672-B | Bearing Used:Deep Groove Ball Bea; Lateral Width L(mm):50; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Electroless Nickel P; Type:Bearings with Housin; Width T(mm):15; Shape:Front Mount; Housing Material:1045 Carbon Steel; Bearing Part Number:6904; |
| Oil and Gas Equipment Bearings E-1713-B | Number of Bearings:Double; Volume Discount:Available; Seals:VV (Non-Contact Rubb; Flange O.D. H(φ):104; Bearing Material:[Steel] Steel; Flange Shape:Square Type; Holder Surface Treatment:Electroless Nickel P; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; |
| Oil and Gas Equipment Bearings 12BA44 | Stroke:No; Machining:No; Grease Type:SH44M; Basic Load Rating, Static Rating(N):48300; Bearing Unit, Type:Round flange shape; Fit:J7; RoHS:6; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; |
| Oil and Gas Equipment Bearings NP76508 | B:79.4; Machining:No; Fit:J7; Grease Type:SH44M; Unit Body Material:Cast Iron; Stroke:No; d:70; Basic Load Rating, Dynamic Rating(N):62200; Seal:Silicone; Bearing Unit, Type:Pillow Type; |
| Oil and Gas Equipment Bearings 106175 10551-TVL | Bearing Used:Deep Groove Ball Bea; Lateral Width L(mm):50; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Electroless Nickel P; Type:Bearings with Housin; Width T(mm):15; Shape:Front Mount; Housing Material:1045 Carbon Steel; Bearing Part Number:6904; |