| Oil and Gas Equipment Bearings E-1713-B | B:79.4; Machining:No; Fit:J7; Grease Type:SH44M; Unit Body Material:Cast Iron; Stroke:No; d:70; Basic Load Rating, Dynamic Rating(N):62200; Seal:Silicone; Bearing Unit, Type:Pillow Type; |
| Oil and Gas Equipment Bearings N-3155-C | Housing Material:1045 Carbon Steel; Seals:ZZ (Double Shield); Type:Bearings with Housin; Flange Shape:Compact Type; Shape:Flange Type; Width T(mm):11; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Electroless Nickel P; Volume Discount:Available; |
| Oil and Gas Equipment Bearings RT-5044 | Oil Reference Speed:38000 rpm; Outside Ring Width B:8.000 mm; Snap Ring Diameter D2 max:29.200 mm; Outside Diameter D:26.000 mm; Grease Reference Speed:26000 rpm; Weight:0.02 Kg; Snap Ring Width f max:0.700 mm; C0r - Static Load Rating:2 kN; Clearance:C0 (Normal); Cr - Dynamic Load Rating:4.6 kN; |
| Oil and Gas Equipment Bearings IB-731 | D:12.25 in; C - Cup Width:2.5000 in; Cup Part Number:219122; Da - Cup Frontface Backing Diameter:11.11 in; Cg - Geometry Factor:0.129; e - ISO Factor2:0.38; Series:219000; Y - ISO Factor3:1.59; Db - Cup Backface Backing Diameter:10.83 in; Design Units:Imperial; |
| Oil and Gas Equipment Bearings N-2504-B | Dimension S1:23.4 mm; Dynamic Load Rating:2380 lbf; Material:Bearing Steel; Center of Bearing from End S:13.9 mm; Shaft Size d:5/8 in; Weight:0.50 lb; Series:Industrial; Static Load Rating:1070 lbf; Set Screw Size:1/4-20; Lubrication Type:Non-Relubricatable; |
| Oil and Gas Equipment Bearings NU-3052-M | Type:Bearings with Housin; Flange O.D. H(φ):62; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; RoHS:6; Bearing Retained:Yes (with retaining; Seals:VV (Non-Contact Rubb; Holder Surface Treatment:Clear Anodize; Shape:Flanged Pilot Type; |
| Oil and Gas Equipment Bearings 10992-SE | Flange Shape:Compact Type; Bearing Retained:No; Holder Surface Treatment:Clear Anodize; Width T(mm):35 ～ 50; Type:Bearings with Housin; Number of Bearings:Double; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; |
| Oil and Gas Equipment Bearings 11181-RA | B:79.4; Machining:No; Fit:J7; Grease Type:SH44M; Unit Body Material:Cast Iron; Stroke:No; d:70; Basic Load Rating, Dynamic Rating(N):62200; Seal:Silicone; Bearing Unit, Type:Pillow Type; |
| Oil and Gas Equipment Bearings TB-8026 | Type:Bearings with Housin; Flange O.D. H(φ):62; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; RoHS:6; Bearing Retained:Yes (with retaining; Seals:VV (Non-Contact Rubb; Holder Surface Treatment:Clear Anodize; Shape:Flanged Pilot Type; |
| Oil and Gas Equipment Bearings E-1769-B | D:12.25 in; C - Cup Width:2.5000 in; Cup Part Number:219122; Da - Cup Frontface Backing Diameter:11.11 in; Cg - Geometry Factor:0.129; e - ISO Factor2:0.38; Series:219000; Y - ISO Factor3:1.59; Db - Cup Backface Backing Diameter:10.83 in; Design Units:Imperial; |