GATES 210-3M-9 Belt Drives

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

CategoryPlain Bearings Spherical Radial
Inventory0.0
Minimum Buy QuantityN/A
Weight0.56
Product GroupB04286
Self AligningYes
Rolling ElementSpherical Plain
Material - Outer MemberSteel
Material - BallSteel
Material - LinerNot Applicable
RelubricatableYes
Enclosure2 Seals
Other Features2 Piece | Double Lip Seals | Lubrication Hole and an Annular Groove in Both Rings
Long Description50MM Bore; 28MM Housing Width; 75MM Outside Diameter; Spherical Plain; Steel Outer Member; Steel Ball; No Liner; 35MM Overall Width; Relubricatable
Inch - MetricMetric
UNSPSC31171515
Harmonized Tariff Code8483.30.80.70
NounBearing
Keyword 3Spherical
Keyword StringPlain Spherical Radial
Manufacturer Item NumberGE 50 ES-2RS
Weight / LBS1.235
d50 mm
Housing Width1.102 Inch | 28 Millimeter
B35 mm
D75 mm
bore diameter:50 mm
inner ring material:Chrome Steel
outside diameter:75 mm
outer ring width:28 mm
misalignment angle:6 °
grade:Commercial/Industrial
inner ring width:35 mm
overall width:35 mm
bearing type:Radial
radial static load capacity:780 kN
lubrication type:Requires Lubrication
radial dynamic load capacity:156 kN
closure type:Sealed
operating temperature range:-30 to +130 °C °F
outer ring material:Chrome Steel
manufacturer upc number:7316576609411
LubricantRegular relubrication – grease
Design (sliding contact surface combination)Steel/steel
Sealing solutionDouble-lip seals
C28 mm
α6 °
dk66 mm
b4.6 mm
b14.6 mm
M3 mm
r1 min.0.6 mm
r2 min.1 mm
da min.54.6 mm
da max.56 mm
Da min.66.2 mm
Da max.70.5 mm
ra max.0.6 mm
rb max.1 mm
Basic dynamic load rating C156 kN
Basic static load rating C0780 kN
Specific dynamic load factor K100 N/mm²
Specific static load factor K0500 N/mm²
Material constant KM330
Mass plain bearing0.56 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now