SKF CR HDL-3033-R Oil Seals

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing numberS71917 CB/HCP4A
Size (mm)120x85x18
Bore Diameter (mm)120
Outer Diameter (mm)85
Width (mm)18
d85 mm
D120 mm
B18 mm
d198.2 mm
d296.7 mm
D2110.2 mm
r1,2 - min.1.1 mm
r3,4 - min.0.6 mm
a25.5 mm
da - min.91 mm
da - max.97.5 mm
db - min.91 mm
db - max.96 mm
Da - max.114 mm
Db - max.116.8 mm
ra - max.1 mm
rb - max.0.6 mm
Basic dynamic load rating - C16.3 kN
Basic static load rating - C016.3 kN
Fatigue load limit - Pu0.68 kN
Limiting speed for grease lubrication18000 r/min
Ball - Dw6.747 mm
Ball - z37
Calculation factor - f010
Preload class A - GA54 N
Preload class B - GB110 N
Preload class C - GC325 N
Calculation factor - f1
Calculation factor - f2A1
Calculation factor - f2B1.03
Calculation factor - f2C1.08
Calculation factor - fHC1.01
Preload class A58 N/micron
Preload class B76 N/micron
Preload class C121 N/micron
r1,2 min.1.1 mm
r3,4 min.0.6 mm
da min.91 mm
da max.97.5 mm
db min.91 mm
db max.96 mm
Da max.114 mm
Db max.116.8 mm
ra max.1 mm
rb max.0.6 mm
Basic dynamic load rating C22.1 kN
Basic static load rating C026 kN
Fatigue load limit Pu0.68 kN
Attainable speed for grease lubrication18000 r/min
Ball diameter Dw6.747 mm
Number of balls z37
Preload class A GA54 N
Static axial stiffness, preload class A58 N/µm
Preload class B GB110 N
Static axial stiffness, preload class B76 N/µm
Preload class C GC325 N
Static axial stiffness, preload class C121 N/µm
Calculation factor f1.11
Calculation factor f11
Calculation factor f2A1
Calculation factor f2B1.03
Calculation factor f2C1.08
Calculation factor fHC1.01
Calculation factor f010
Mass bearing0.56 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now