SKF CR 10X19X7 HMSA10 V1 Oil Seals

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing number7203 ACD/HCP4A
Size (mm)40x17x12
Bore Diameter (mm)40
Outer Diameter (mm)17
Width (mm)12
d17 mm
D40 mm
B12 mm
d124.1 mm
d224.1 mm
D132.8 mm
r1,2 - min.0.6 mm
r3,4 - min.0.3 mm
a12.8 mm
da - min.21.2 mm
db - min.21.2 mm
Da - max.35.8 mm
Db - max.37.6 mm
ra - max.0.6 mm
rb - max.0.3 mm
dn25.9 mm
Basic dynamic load rating - C8.8 kN
Basic static load rating - C04 kN
Fatigue load limit - Pu0.17 kN
Limiting speed for grease lubrication45000 r/min
Limiting speed for oil lubrication67000 mm/min
Ball - Dw7.144 mm
Ball - z10
Gref1.005 cm3
Calculation factor - e0.68
Calculation factor - Y21.41
Calculation factor - Y00.76
Calculation factor - X20.67
Calculation factor - Y10.92
Preload class A - GA60 N
Preload class B - GB120 N
Preload class C - GC240 N
Preload class D - GD480 N
Calculation factor - f1.03
Calculation factor - f10.99
Calculation factor - f2A1
Calculation factor - f2B1.01
Calculation factor - f2C1.03
Calculation factor - f2D1.06
Calculation factor - fHC1.01
Preload class A59 N/micron
Preload class B76 N/micron
Preload class C99 N/micron
Preload class D131 N/micron
r1,2 min.0.6 mm
r3,4 min.0.3 mm
da min.21.2 mm
db min.21.2 mm
Da max.35.8 mm
Db max.37.6 mm
ra max.0.6 mm
rb max.0.3 mm
Basic dynamic load rating C8.84 kN
Basic static load rating C04 kN
Fatigue load limit Pu0.17 kN
Attainable speed for grease lubrication45000 r/min
Attainable speed for oil-air lubrication67000 r/min
Ball diameter Dw7.144 mm
Number of balls z10
Reference grease quantity Gref1.005 cm³
Preload class A GA60 N
Static axial stiffness, preload class A59 N/µm
Preload class B GB120 N
Static axial stiffness, preload class B76 N/µm
Preload class C GC240 N
Static axial stiffness, preload class C99 N/µm
Preload class D GD480 N
Static axial stiffness, preload class D131 N/µm
Calculation factor f1.03
Calculation factor f10.99
Calculation factor f2A1
Calculation factor f2B1.01
Calculation factor f2C1.03
Calculation factor f2D1.06
Calculation factor fHC1.01
Calculation factor e0.68
Calculation factor (single, tandem) Y20.87
Calculation factor (single, tandem) Y00.38
Calculation factor (single, tandem) X20.41
Calculation factor (back-to-back, face-to-face) Y10.92
Calculation factor (back-to-back, face-to-face) Y21.41
Calculation factor (back-to-back, face-to-face) Y00.76
Calculation factor (back-to-back, face-to-face) X20.67
Mass bearing0.054 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now