INA RASEY1 11/16M Mounted Units & Inserts

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

CategorySelf Aligning Ball Bearings
Inventory3.0
Minimum Buy QuantityN/A
Weight0.415
Product GroupB00152
Mounting MethodShaft
Enclosure2 Seals
Rolling ElementBall Bearing
Cage MaterialPolyamide
Precision ClassABEC 1 | ISO P0
Internal ClearanceC0-Medium
Number of Rows of BallsDouble Row
Other FeaturesAllowable Misalignment 1.5 Deg | High Capacity Design
Long Description35MM Bore; Shaft Mount; 72MM Outside Diameter; 23MM Inner Race Width; 23MM Outer Race Width; 2 Seals; Polyamide Cage; Double Row of Balls; ABEC 1 | ISO P0; C0-Medium
Inch - MetricMetric
UNSPSC31171532
Harmonized Tariff Code8482.10.50.68
NounBearing
Keyword StringSelf Aligning
Manufacturer Item Number2207 E-2RS1TN9
Weight / LBS0.913
D72 mm
d35 mm
Inner Race Width0.906 Inch | 23 Millimeter
Outer Race Width0.906 Inch | 23 Millimeter
bore diameter:35 mm
precision rating:Not Rated
outside diameter:72 mm
maximum rpm:6300 RPM
overall width:23 mm
cage material:Fiberglass Reinforced Nylon
bore type:Straight
finish/coating:Uncoated
closure type:Double Sealed
maximum misalignment:2.5 °
internal clearance:C0
outer ring width:23 mm
operating temperature range:-40 to +210 °F
fillet radius:1.1 mm
dynamic load capacity:19 kN
series:2200
static load capacity:6 kN
B23 mm
d2 ≈42.7 mm
D2 ≈62.69 mm
r1,2 min.1.1 mm
da min.42 mm
da max.42.5 mm
Da max.65 mm
ra max.1.1 mm
Basic dynamic load rating C19 kN
Basic static load rating C06 kN
Fatigue load limit Pu0.31 kN
Limiting speed6300 r/min
Permissible angular misalignment α1.5 °
Calculation factor kr0.045
Calculation factor e0.23
Calculation factor Y02.8
Calculation factor Y12.7
Calculation factor Y24.2
Mass bearing0.41 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now