RHP BEARING SLFL1FLA Mounted Units & Inserts

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing numberS7006 ACD/P4A
Size (mm)55x30x13
Bore Diameter (mm)55
Outer Diameter (mm)30
Width (mm)13
d30 mm
D55 mm
B13 mm
d137.7 mm
d237.7 mm
D249.57 mm
r1,2 - min.1 mm
r3,4 - min.0.3 mm
a16.6 mm
da - min.34.6 mm
da - max.37.2 mm
db - min.34.6 mm
db - max.37.2 mm
Da - max.50.4 mm
Db - max.53 mm
ra - max.1 mm
rb - max.0.3 mm
Basic dynamic load rating - C13.8 kN
Basic static load rating - C07.6 kN
Fatigue load limit - Pu0.325 kN
Limiting speed for grease lubrication28000 r/min
Ball - Dw7.938 mm
Ball - z14
Calculation factor - e0.68
Calculation factor - Y21.41
Calculation factor - Y00.76
Calculation factor - X20.67
Calculation factor - Y10.92
Preload class A - GA90 N
Preload class B - GB180 N
Preload class C - GC360 N
Preload class D - GD720 N
Calculation factor - f1.06
Calculation factor - f10.99
Calculation factor - f2A1
Calculation factor - f2B1.02
Calculation factor - f2C1.05
Calculation factor - f2D1.08
Calculation factor - fHC1
Preload class A79 N/micron
Preload class B102 N/micron
Preload class C133 N/micron
Preload class D176 N/micron
r1,2 min.1 mm
r3,4 min.0.3 mm
da min.34.6 mm
da max.37.2 mm
db min.34.6 mm
db max.37.2 mm
Da max.50.4 mm
Db max.53 mm
ra max.1 mm
rb max.0.3 mm
Basic dynamic load rating C13.8 kN
Basic static load rating C07.65 kN
Fatigue load limit Pu0.325 kN
Attainable speed for grease lubrication28000 r/min
Ball diameter Dw7.938 mm
Number of balls z14
Preload class A GA90 N
Static axial stiffness, preload class A79 N/µm
Preload class B GB180 N
Static axial stiffness, preload class B102 N/µm
Preload class C GC360 N
Static axial stiffness, preload class C133 N/µm
Preload class D GD720 N
Static axial stiffness, preload class D176 N/µm
Calculation factor f1.06
Calculation factor f10.99
Calculation factor f2A1
Calculation factor f2B1.02
Calculation factor f2C1.05
Calculation factor f2D1.08
Calculation factor fHC1
Calculation factor e0.68
Calculation factor (single, tandem) Y20.87
Calculation factor (single, tandem) Y00.38
Calculation factor (single, tandem) X20.41
Calculation factor (back-to-back, face-to-face) Y10.92
Calculation factor (back-to-back, face-to-face) Y21.41
Calculation factor (back-to-back, face-to-face) Y00.76
Calculation factor (back-to-back, face-to-face) X20.67
Mass bearing0.11 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now