| da | 61.913 mm |
| Da | 160 mm |
| Ca | 64.795 mm |
| A1 | 98.425 mm |
| A2 | 223.838 mm |
| ba | 35.719 mm |
| H | 192.088 mm |
| H1 | 101.6 mm |
| H2 | 41.275 mm |
| J min. | 263.525 mm |
| J max. | 295.275 mm |
| L | 349.25 mm |
| N1 | 22.225 mm |
| R1 | 60.325 mm |
| R2 | 27.94 mm |
| RG | 3/8 NPT |
| PG | 1/8 NPT |
| h | 42.862 mm |
| Housing | SAF 615 |
| Stabilizing ring | 2 x SR-1615 |
| Taconite seal | TER 37 |
| End plug (suffix Y) | EPR 7 |
| Max. speed for Taconite seal | 1250 r/min |
| P60° | 121 kN |
| P90° | 72.5 kN |
| P120° | 45.4 kN |
| P150° | 40.5 kN |
| P180° | 49.8 kN |
| Pa | 8.27 kN |
| Mass pillow block | 21.5 kg |
| Cap bolt | 2 x 5/8-11 UNC |
| Cap bolt recommended tightening torque | 298.3 N·m |
| Cap bolt, SAE grade | 8 |
| Appropriate attachment bolt size G | 0.75 in |
| Initial grease fill | 286.33 g |
