SKF NU 230 ECML/C3

Min.Order Quantity 1 pcs
Price Negotiable

Product Details

Bearing number6310N
Size (mm)50x110x27
Bore Diameter (mm)50
Outer Diameter (mm)110
Width (mm)27
d50 mm
D110 mm
B27 mm
C27 mm
rn0,5 mm
a3,28 mm
b2,7 mm
r min.2 mm
r0 max.0,6 mm
D1106,81 mm
da min.59 mm
da max68,5 mm
Da max.101 mm
ra max.2 mm
Dx118 mm
Cy5,4 mm
Cz2,5 mm
Weight1,07 Kg
Basic dynamic load rating (C)62 kN
Basic static load rating (C0)38,5 kN
(Grease) Lubrication Speed6 400 r/min
(Oil) Lubrication Speed7 500 r/min
a min3.07 mm
a max3.28 mm
rs min2 mm
rNs min0.5 mm
D3 max106.81 mm
b min2.7 mm
b max3 mm
r0 max0.6 mm
Radial clearance classCN
Mass1.07 kg
Dynamic load, C62 kN
Static load, C038.5 kN
Fatigue limit load, Cu1.75 kN
f013.2
Nlim (oil)7,500 rpm
Nlim (grease)6,400 rpm
Min operating temperature, Tmin-20 °C
Max operating temperature, Tmax120 °C
Characteristic cage frequency, FTF0.38 Hz
Characteristic rolling element frequency, BSF4.07 Hz
Characteristic outer ring frequency, BPF03.07 Hz
Characteristic inner ring frequency, BPFI4.93 Hz
da min59 mm
Da max101 mm
ra max2 mm
rNa max0.5 mm
CategorySingle Row Ball Bearing
Inventory0.0
Minimum Buy QuantityN/A
Weight / Kilogram1.04
Product GroupB00308
EnclosureOpen
Precision ClassABEC 1 | ISO P0
Maximum Capacity / Filling SlotNo
Rolling ElementBall Bearing
Snap RingYes
Internal Special FeaturesNo
Cage MaterialSteel
Internal ClearanceC0-Medium
Inch - MetricMetric
Long Description50MM Bore; 110MM Outside Diameter; 27MM Outer Race Width; Open; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; Yes Snap Ring; No Internal Special Features; C0-Medium Internal Clearance; Steel Cage
Other FeaturesDeep Groove | With Snap Ring Groove
UNSPSC31171504
Harmonized Tariff Code8482.10.50.68
NounBearing
Keyword StringBall
Weight / LBS2.35894
Inner Race Width0 Inch | 0 Millimeter
Outer Race Width1.063 Inch | 27 Millimeter
Outside Diameter4.331 Inch | 110 Millimeter
Bore1.969 Inch | 50 Millimeter
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now