| da | 85.725 mm |
| Da | 180 mm |
| Ca | 70.104 mm |
| A1 | 111.125 mm |
| A2 | 222.25 mm |
| S | 4.763 mm |
| ba | 51.594 mm |
| H | 222.25 mm |
| H1 | 114.3 mm |
| H2 | 44.45 mm |
| J min. | 295.275 mm |
| J max. | 333.375 mm |
| J1 | 60.325 mm |
| L | 387.35 mm |
| N1 | 22.225 mm |
| R1 | 65.088 mm |
| R2 | 30.163 mm |
| RG | 3/8 NPT |
| PG | 1/4 NPT |
| h | 42.069 mm |
| Housing | SAW 520 |
| Bearing | 23220 CCK/W33 |
| Stabilizing ring | SR-20-17 |
| Taconite seal | 2 x TER 101 |
| End plug (suffix Y) | EPR 12 |
| Max. speed for Taconite seal | 900 r/min |
| P60° | 119 kN |
| P90° | 71.2 kN |
| P120° | 44.5 kN |
| P150° | 40 kN |
| P180° | 48.9 kN |
| Pa | 18.1 kN |
| Mass pillow block | 34 kg |
| Cap bolt | 2 x 3/4-10 UNC |
| Cap bolt recommended tightening torque | 515.2 N·m |
| Cap bolt, SAE grade | 8 |
| Appropriate attachment bolt size G | 0.75 in |
| Initial grease fill | 181.44 g |
