Orings 127 FKM O-PACK (5-PACK)

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing number6326/HC5C3S0VA970
Size (mm)130x280x58
Bore Diameter (mm)130
Outer Diameter (mm)280
Width (mm)58
d130 mm
D280 mm
B58 mm
C58 mm
d1189 mm
r1 min.4 mm
r2 min.4 mm
D1228 mm
da min.147 mm
Da max.263 mm
ra max.3 mm
Weight15,5 Kg
Basic dynamic load rating (C)213 kN
Basic static load rating (C0)223 kN
Fatigue load limit (Pu)4,9
Reference speed6700 r/min
Limiting speed3800 r/min
Calculation factor (f0)15
CategorySingle Row Ball Bearing
Inventory0.0
Minimum Buy QuantityN/A
Product GroupB00308
EnclosureOpen
Precision ClassABEC 1 | ISO P0
Maximum Capacity / Filling SlotNo
Rolling ElementBall Bearing
Snap RingNo
Internal Special FeaturesSilicon Nitride Rolling Element | Electrical Insulated
Cage MaterialSteel
Internal ClearanceC3-Loose
Inch - MetricMetric
Long Description130MM Bore; 280MM Outside Diameter; 58MM Outer Race Width; Open; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; Silicon Nitride Rolling Element | Electrical Insulated Internal Special F
Other FeaturesDeep Groove | Hybrid Silicon Nitride Rolling Element | Wind Turbine Application
UNSPSC31171504
Harmonized Tariff Code8482.10.50.68
NounBearing
Keyword StringBall
Weight / LBS15.5
Inner Race Width0 Inch | 0 Millimeter
Bore5.118 Inch | 130 Millimeter
Outer Race Width2.283 Inch | 58 Millimeter
Outside Diameter11.024 Inch | 280 Millimeter
d1 ≈189.95 mm
D1 ≈227.85 mm
r1,2 min.4 mm
Basic dynamic load rating C186 kN
Basic dynamic load rating - effective C223 kN
Basic static load rating C0166 kN
Basic static load rating - effective C0223 kN
Fatigue load limit Pu4.9 kN
Calculation factor kr0.03
Calculation factor f015.1
Mass bearing15.5 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now