Orings OK-311 O-RING KIT

Min.Order Quantity 1 pcs
Price Negotiable

Product Details

Bearing numberNJ208EG
Size (mm)40x80x18
Bore Diameter (mm)40
Outer Diameter (mm)80
Width (mm)18
d40 mm
Fw49,5 mm
D80 mm
B18 mm
C18 mm
r min.1,1 mm
r1 min.1,1 mm
Weight0,38 Kg
Basic dynamic load rating (C)55,5 kN
Basic static load rating (C0)55,5 kN
(Grease) Lubrication Speed9500 r/min
CategoryCylindrical Roller Bearing
Inventory0.0
Minimum Buy QuantityN/A
Weight / Kilogram0.381
Product GroupB04144
Bore ProfileStraight
Cage MaterialNylon
Precision ClassRBEC 1 | ISO P0
Number of Rows of RollersSingle Row
SeparableInner Ring - One Side
Rolling ElementCylindrical Roller Bearing
ProfileComplete with Outer and Inner Ring
Snap RingNo
Internal ClearanceC0-Medium
RetainerYes
RelubricatableYes
Inch - MetricMetric
Other FeaturesHigh Capacity | 1 Rib Inner Ring | 2 Rib Outer Ring | Cage on Outer Ring ID
Long Description40MM Bore; Straight Bore Profile; 80MM Outside Diameter; 18MM Width; Nylon Cage Matetrial; RBEC 1 | ISO P0; Single Row; Inner Ring - One Side Separable; No Snap Ring; Relubricatable; C0-Medium Interna
UNSPSC31171547
Harmonized Tariff Code8482.50.00.00
NounBearing
Manufacturer Item NumberNJ208 EG
Weight / LBS0.84
Width0.709 Inch | 18 Millimeter
Bore1.575 Inch | 40 Millimeter
Outside Diameter3.15 Inch | 80 Millimeter
EnclosureOpen
ConfigurationSingle Row
Bore TypeCylindrical Bore
Bore Size40 mm
Inside Ring Outside Diameter49.5 mm
Fillet Radius/Chamfer1.1 mm
r11.1 mm
Dynamic Load Rating55,500 N
Static Load Rating55,500 N
Limiting Speed - Grease9,500 rpm
Limiting Speed - Oil9,000 rpm
Radial Clearance0.025 to 0.050 mm
db (min)47 mm
db (max)49 mm
dc (min)52 mm
dd (min)56 mm
Da (max)73 mm
ra (max)1 mm
ra1 (max)1 mm
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now