| da | 36.513 mm |
| Da | 85.001 mm |
| Ca | 28.804 mm |
| A1 | 60.325 mm |
| A2 | 88.9 mm |
| S | 4.763 mm |
| ba | 22.225 mm |
| H | 112.713 mm |
| H1 | 57.15 mm |
| H2 | 20.637 mm |
| J min. | 158.75 mm |
| J max. | 177.8 mm |
| L | 209.55 mm |
| N1 | 15.875 mm |
| R1 | 28.575 mm |
| R2 | 12.7 mm |
| RG | 1/8 NPT |
| PG | 1/8 NPT |
| h | 25.4 mm |
| Housing | SAF 509 |
| Stabilizing ring | SR-9-0 |
| Contact seal | 2 x B9784-12 |
| Ventilation fitting | 38174-12 |
| End plug (suffix Y) | EPR 3 |
| Max. speed for contact seal | 4000 r/min |
| P60° | 20.9 kN |
| P90° | 12.5 kN |
| P120° | 7.56 kN |
| P150° | 6.67 kN |
| P180° | 8.01 kN |
| Pa | 2.54 kN |
| Mass pillow block | 5.17 kg |
| Cap bolt | 2 x 7/16-14 UNC |
| Cap bolt recommended tightening torque | 61 N·m |
| Cap bolt, SAE grade | 5 |
| Appropriate attachment bolt size G | 0.5 in |
| Initial grease fill | 51.03 g |
