| da | 180 mm |
| db | 114.3 mm |
| dc | 96.838 mm |
| Da | 180 mm |
| Ca | 70.104 mm |
| A1 | 111.125 mm |
| A2 | 173.037 mm |
| S | 4.763 mm |
| ba | 52.388 mm |
| H | 222.25 mm |
| H1 | 114.3 mm |
| H2 | 44.45 mm |
| J min. | 295.275 mm |
| J max. | 333.375 mm |
| J1 | 60.325 mm |
| L | 387.35 mm |
| N1 | 22.225 mm |
| R1 | 65.088 mm |
| R2 | 30.163 mm |
| RG | 3/8 NPT |
| PG | 1/4 NPT |
| h | 60.325 mm |
| Housing | SAW 220 |
| Stabilizing ring | SR-20-17 |
| Labyrinth ring (db shaft position) | LOR 118 |
| PosiTrac Plus contact element (db shaft position) | B10724-117 |
| Labyrinth ring (dc shaft position) | LOR 106 |
| PosiTrac Plus contact element (dc shaft position) | B10724-106 |
| End plug (suffix Y) | EPR 12 |
| Max. speed for PosiTrac Plus seal | 1300 r/min |
| P60° | 104 kN |
| P90° | 62.3 kN |
| P120° | 39.1 kN |
| P150° | 35.6 kN |
| P180° | 42.3 kN |
| Pa | 18.1 kN |
| Mass pillow block | 34.5 kg |
| Cap bolt | 2 x 3/4-10 UNC |
| Cap bolt recommended tightening torque | 515.2 N·m |
| Cap bolt, SAE grade | 8 |
| Appropriate attachment bolt size G | 0.75 in |
| Initial grease fill | 181.44 g |
