NSK 6019DDU

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing number7018 ACB/HCP4A
Size (mm)140x90x24
Bore Diameter (mm)140
Outer Diameter (mm)90
Width (mm)24
d90 mm
D140 mm
B24 mm
d1108.7 mm
d2106.13 mm
D2125 mm
r1,2 - min.1.5 mm
r3,4 - min.1 mm
a39 mm
da - min.97 mm
db - min.97 mm
Da - max.133 mm
Db - max.135.4 mm
ra - max.1.5 mm
rb - max.1 mm
dn110 mm
Basic dynamic load rating - C27 kN
Basic static load rating - C023.6 kN
Fatigue load limit - Pu0.93 kN
Limiting speed for grease lubrication13000 r/min
Limiting speed for oil lubrication20000 mm/min
Ball - Dw10.319 mm
Ball - z25
Gref14.1 cm3
Calculation factor - e0.68
Calculation factor - Y21.41
Calculation factor - Y00.76
Calculation factor - X20.67
Calculation factor - Y10.92
Preload class A - GA160 N
Preload class B - GB320 N
Preload class C - GC960 N
Calculation factor - f1.07
Calculation factor - f10.99
Calculation factor - f2A1
Calculation factor - f2B1.02
Calculation factor - f2C1.05
Calculation factor - fHC1.01
Preload class A159 N/micron
Preload class B203 N/micron
Preload class C307 N/micron
r1,2 min.1.5 mm
r3,4 min.1 mm
da min.97 mm
db min.97 mm
Da max.133 mm
Db max.135.4 mm
ra max.1.5 mm
rb max.1 mm
Basic dynamic load rating C35.8 kN
Basic static load rating C040 kN
Fatigue load limit Pu0.93 kN
Attainable speed for grease lubrication13000 r/min
Attainable speed for oil-air lubrication20000 r/min
Ball diameter Dw10.319 mm
Number of balls z25
Reference grease quantity Gref14.1 cm³
Preload class A GA160 N
Static axial stiffness, preload class A159 N/µm
Preload class B GB320 N
Static axial stiffness, preload class B203 N/µm
Preload class C GC960 N
Static axial stiffness, preload class C307 N/µm
Calculation factor f1.07
Calculation factor f10.99
Calculation factor f2A1
Calculation factor f2B1.02
Calculation factor f2C1.05
Calculation factor fHC1.01
Calculation factor e0.68
Calculation factor (single, tandem) Y20.87
Calculation factor (single, tandem) Y00.38
Calculation factor (single, tandem) X20.41
Calculation factor (back-to-back, face-to-face) Y10.92
Calculation factor (back-to-back, face-to-face) Y21.41
Calculation factor (back-to-back, face-to-face) Y00.76
Calculation factor (back-to-back, face-to-face) X20.67
Mass bearing1.18 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now