Timken Fafnir 9109K

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing number7012 CE/HCP4AL1
Size (mm)95x60x18
Bore Diameter (mm)95
Outer Diameter (mm)60
Width (mm)18
d60 mm
D95 mm
B18 mm
d172.74 mm
d270.6 mm
D182.22 mm
b1.6 mm
C15.65 mm
C23.4 mm
C33.4 mm
r1,2 - min.1.1 mm
r3,4 - min.0.6 mm
a19.5 mm
da - min.66 mm
db - min.66 mm
Da - max.89 mm
Db - max.90.8 mm
ra - max.1 mm
rb - max.0.6 mm
dn74.6 mm
Basic dynamic load rating - C17.2 kN
Basic static load rating - C012.9 kN
Fatigue load limit - Pu0.54 kN
Limiting speed for grease lubrication24000 r/min
Limiting speed for oil lubrication37000 mm/min
Ball - Dw7.938 mm
Ball - z25
Gref5.3 cm3
Calculation factor - f08.5
Preload class A - GA92 N
Preload class B - GB275 N
Preload class C - GC550 N
Calculation factor - f1
Calculation factor - f2A1
Calculation factor - f2B1.03
Calculation factor - f2C1.05
Calculation factor - fHC1.01
Preload class A53 N/micron
Preload class B83 N/micron
Preload class C112 N/micron
r1,2 min.1.1 mm
r3,4 min.0.6 mm
da min.66 mm
db min.66 mm
Da max.89 mm
Db max.90.8 mm
ra max.1 mm
rb max.0.6 mm
Basic dynamic load rating C17.2 kN
Basic static load rating C012.9 kN
Fatigue load limit Pu0.54 kN
Attainable speed for grease lubrication24000 r/min
Attainable speed for oil-air lubrication37000 r/min
Ball diameter Dw7.938 mm
Number of balls z25
Reference grease quantity Gref5.3 cm³
Preload class A GA92 N
Static axial stiffness, preload class A53 N/µm
Preload class B GB275 N
Static axial stiffness, preload class B83 N/µm
Preload class C GC550 N
Static axial stiffness, preload class C112 N/µm
Calculation factor f1.08
Calculation factor f11
Calculation factor f2A1
Calculation factor f2B1.03
Calculation factor f2C1.05
Calculation factor fHC1.01
Calculation factor f08.5
Mass bearing0.39 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now