Rotor Clip HO-625 STPA

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing numberS71908 CB/HCP4A
Size (mm)62x40x12
Bore Diameter (mm)62
Outer Diameter (mm)40
Width (mm)12
d40 mm
D62 mm
B12 mm
d148.46 mm
d247.6 mm
D255.64 mm
r1,2 - min.0.6 mm
r3,4 - min.0.3 mm
a14.8 mm
da - min.43.2 mm
da - max.47.9 mm
db - min.43.2 mm
db - max.47 mm
Da - max.58.8 mm
Db - max.60 mm
ra - max.0.6 mm
rb - max.0.3 mm
Basic dynamic load rating - C5.4 kN
Basic static load rating - C04.2 kN
Fatigue load limit - Pu0.176 kN
Limiting speed for grease lubrication36000 r/min
Ball - Dw3.969 mm
Ball - z28
Calculation factor - f09.8
Preload class A - GA18 N
Preload class B - GB36 N
Preload class C - GC110 N
Calculation factor - f1
Calculation factor - f2A1
Calculation factor - f2B1.03
Calculation factor - f2C1.08
Calculation factor - fHC1.01
Preload class A27 N/micron
Preload class B36 N/micron
Preload class C58 N/micron
r1,2 min.0.6 mm
r3,4 min.0.3 mm
da min.43.2 mm
da max.47.9 mm
db min.43.2 mm
db max.47 mm
Da max.58.8 mm
Db max.60 mm
ra max.0.6 mm
rb max.0.3 mm
Basic dynamic load rating C7.15 kN
Basic static load rating C06.95 kN
Fatigue load limit Pu0.176 kN
Attainable speed for grease lubrication36000 r/min
Ball diameter Dw3.969 mm
Number of balls z28
Preload class A GA18 N
Static axial stiffness, preload class A27 N/µm
Preload class B GB36 N
Static axial stiffness, preload class B36 N/µm
Preload class C GC110 N
Static axial stiffness, preload class C58 N/µm
Calculation factor f1.06
Calculation factor f11
Calculation factor f2A1
Calculation factor f2B1.03
Calculation factor f2C1.08
Calculation factor fHC1.01
Calculation factor f09.8
Mass bearing0.12 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now