TIMKEN Uruguay 6005Z Ball Bearings

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing number7310
Size (mm)50x110x27
Bore Diameter (mm)50
Outer Diameter (mm)110
Width (mm)27
d50 mm
D110 mm
B27 mm
C27 mm
Angle (α)25 °
a36,5 mm
r min.2 mm
r1 min.1 mm
da min.60 mm
db min55,5 mm
ra max.2 mm
Weight1,09 Kg
Basic dynamic load rating (C)74,5 kN
Basic static load rating (C0)52,5 kN
(Grease) Lubrication Speed7 100 r/min
Contact angle α30 °
rs min2 mm
r1s min1 mm
Mass1.09 kg
Dynamic load, C74.5 kN
Static load, C052.5 kN
Fatigue limit load, Cu2.39 kN
Nlim (oil)9,400 rpm
Nlim (grease)7,100 rpm
Min operating temperature, Tmin-40 °C
Max operating temperature, Tmax120 °C
Characteristic cage frequency, FTF0.4 Hz
Characteristic rolling element frequency, BSF4.13 Hz
Characteristic outer ring frequency, BPF04.79 Hz
Characteristic inner ring frequency, BPFI7.21 Hz
da min60 mm
Da max100 mm
Db max104.5 mm
r1a max1 mm
ra max2 mm
CategoryAngular Contact Ball Bearing
Inventory0.0
Minimum Buy QuantityN/A
Weight / Kilogram1.11
Product GroupB00308
EnclosureOpen
Flush GroundNo
Rolling ElementBall Bearing
Number of Rows of BallsSingle Row
Precision ClassABEC 1 | ISO P0
Maximum Capacity / Filling SlotNo
Snap RingNo
Cage MaterialSteel
Contact Angle30 Degree
Internal ClearanceC0-Medium
Number of Bearings1 (Single)
Inch - MetricMetric
Long Description50MM Bore; 110MM Outside Diameter; 27MM Width; Open; No Flush Ground; Ball Bearing; Single Row of Balls; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; C0-Medium; Steel Cage; 30 Degree; 1 (Single)
UNSPSC31171531
Harmonized Tariff Code8482.10.50.28
NounBearing
Keyword StringAngular Contact
Bore1.969 Inch | 50 Millimeter
Width1.063 Inch | 27 Millimeter
Outside Diameter4.331 Inch | 110 Millimeter
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now