RHP Japan BEARING MJT4.1/2M Angular Contact Ball Bearings

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing number6220NR
Size (mm)100x180x34
Bore Diameter (mm)100
Outer Diameter (mm)180
Width (mm)34
d100 mm
D180 mm
B34 mm
C34 mm
rn0,5 mm
a5,69 mm
b3,5 mm
f3,1 mm
r min.2,1 mm
r0 max.0,6 mm
D1173,66 mm
D2192,9 mm
da min.111 mm
da max122 mm
Da max.169 mm
ra max.2 mm
Dx195 mm
Cy8,4 mm
Cz3,1 mm
Weight3,14 Kg
Basic dynamic load rating (C)122 kN
Basic static load rating (C0)93 kN
(Grease) Lubrication Speed3 500 r/min
(Oil) Lubrication Speed4 200 r/min
a min5.44 mm
a max5.69 mm
Ca min8.54 mm
Ca max8.79 mm
rs min2.1 mm
rNs min0.5 mm
D3 max173.66 mm
b min3.5 mm
b max3.8 mm
r0 max0.6 mm
D4 max192.9 mm
Snap ring referenceR180
Radial clearance classCN
Mass3.14 kg
Dynamic load, C122 kN
Static load, C093 kN
Fatigue limit load, Cu4.25 kN
f014.4
Nlim (oil)4,200 rpm
Nlim (grease)3,500 rpm
Min operating temperature, Tmin-20 °C
Max operating temperature, Tmax120 °C
da min111 mm
Da max169 mm
ra max2 mm
rNa max0.5 mm
Db min195 mm
CategorySingle Row Ball Bearing
Inventory0.0
Minimum Buy QuantityN/A
Weight / Kilogram3.14
Product GroupB00308
EnclosureOpen
Precision ClassABEC 1 | ISO P0
Maximum Capacity / Filling SlotNo
Rolling ElementBall Bearing
Snap RingYes
Internal Special FeaturesNo
Cage MaterialSteel
Internal ClearanceC0-Medium
Inch - MetricMetric
Long Description100MM Bore; 180MM Outside Diameter; 34MM Outer Race Width; Open; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; Yes Snap Ring; No Internal Special Features; C0-Medium Internal Clearance; Steel Cage
Other FeaturesDeep Groove | With Snap Ring
UNSPSC31171504
Harmonized Tariff Code8482.10.50.68
NounBearing
Keyword StringBall
Weight / LBS6.89826
Inner Race Width0 Inch | 0 Millimeter
Bore3.937 Inch | 100 Millimeter
Outer Race Width1.339 Inch | 34 Millimeter
Outside Diameter7.087 Inch | 180 Millimeter
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now