NTN Australia 2209SKC3 Ball Bearings

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing numberS7213 ACD/P4A
Size (mm)120x65x23
Bore Diameter (mm)120
Outer Diameter (mm)65
Width (mm)23
d65 mm
D120 mm
B23 mm
d182.9 mm
d282.9 mm
D2105.3 mm
r1,2 - min.1.5 mm
r3,4 - min.0.6 mm
a33.2 mm
da - min.74 mm
da - max.82.1 mm
db - min.74 mm
db - max.82.1 mm
Da - max.111 mm
Db - max.115.8 mm
ra - max.1.5 mm
rb - max.0.6 mm
Basic dynamic load rating - C63.7 kN
Basic static load rating - C051 kN
Fatigue load limit - Pu2.2 kN
Limiting speed for grease lubrication10000 r/min
Ball - Dw15.875 mm
Ball - z15
Calculation factor - e0.68
Calculation factor - Y21.41
Calculation factor - Y00.76
Calculation factor - X20.67
Calculation factor - Y10.92
Preload class A - GA400 N
Preload class B - GB800 N
Preload class C - GC1600 N
Preload class D - GD3200 N
Calculation factor - f1.07
Calculation factor - f10.99
Calculation factor - f2A1
Calculation factor - f2B1.01
Calculation factor - f2C1.02
Calculation factor - f2D1.05
Calculation factor - fHC1
Preload class A189 N/micron
Preload class B245 N/micron
Preload class C324 N/micron
Preload class D437 N/micron
r1,2 min.1.5 mm
r3,4 min.0.6 mm
da min.74 mm
da max.82.1 mm
db min.74 mm
db max.82.1 mm
Da max.111 mm
Db max.115.8 mm
ra max.1.5 mm
rb max.0.6 mm
Basic dynamic load rating C63.7 kN
Basic static load rating C051 kN
Fatigue load limit Pu2.2 kN
Attainable speed for grease lubrication10000 r/min
Ball diameter Dw15.875 mm
Number of balls z15
Preload class A GA400 N
Static axial stiffness, preload class A189 N/µm
Preload class B GB800 N
Static axial stiffness, preload class B245 N/µm
Preload class C GC1600 N
Static axial stiffness, preload class C324 N/µm
Preload class D GD3200 N
Static axial stiffness, preload class D437 N/µm
Calculation factor f1.07
Calculation factor f10.99
Calculation factor f2A1
Calculation factor f2B1.01
Calculation factor f2C1.02
Calculation factor f2D1.05
Calculation factor fHC1
Calculation factor e0.68
Calculation factor (single, tandem) Y20.87
Calculation factor (single, tandem) Y00.38
Calculation factor (single, tandem) X20.41
Calculation factor (back-to-back, face-to-face) Y10.92
Calculation factor (back-to-back, face-to-face) Y21.41
Calculation factor (back-to-back, face-to-face) Y00.76
Calculation factor (back-to-back, face-to-face) X20.67
Mass bearing1.03 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now