FAG France BEARING 625-2RSR Ball Bearings

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing number71917 CE/P4AH1
Size (mm)120x85x18
Bore Diameter (mm)120
Outer Diameter (mm)85
Width (mm)18
d85 mm
D120 mm
B18 mm
d196 mm
d292.9 mm
D1109.22 mm
K0.5 mm
C15.48 mm
r1,2 - min.1.1 mm
r3,4 - min.0.6 mm
a23.4 mm
da - min.91 mm
db - min.88.2 mm
Da - max.114 mm
Db - max.116.8 mm
ra - max.1 mm
rb - max.0.6 mm
dn98.6 mm
Basic dynamic load rating - C29.6 kN
Basic static load rating - C023.2 kN
Fatigue load limit - Pu0.95 kN
Limiting speed for grease lubrication15500 r/min
Limiting speed for oil lubrication24000 mm/min
Ball - Dw11.112 mm
Ball - z23
Gref7 cm3
Calculation factor - f08.4
Preload class A - GA160 N
Preload class B - GB479 N
Preload class C - GC957 N
Calculation factor - f1
Calculation factor - f2A1
Calculation factor - f2B1.04
Calculation factor - f2C1.08
Calculation factor - fHC1
Preload class A63 N/micron
Preload class B99 N/micron
Preload class C136 N/micron
r1,2 min.1.1 mm
r3,4 min.0.6 mm
da min.91 mm
db min.88.2 mm
Da max.114 mm
Db max.116.8 mm
ra max.1 mm
rb max.0.6 mm
Basic dynamic load rating C29.6 kN
Basic static load rating C023.2 kN
Fatigue load limit Pu0.95 kN
Attainable speed for grease lubrication15500 r/min
Attainable speed for oil-air lubrication24000 r/min
Ball diameter Dw11.112 mm
Number of balls z23
Reference grease quantity Gref7 cm³
Preload class A GA160 N
Static axial stiffness, preload class A63 N/µm
Preload class B GB479 N
Static axial stiffness, preload class B99 N/µm
Preload class C GC957 N
Static axial stiffness, preload class C136 N/µm
Calculation factor f1.16
Calculation factor f11
Calculation factor f2A1
Calculation factor f2B1.04
Calculation factor f2C1.08
Calculation factor fHC1
Calculation factor f08.4
Mass bearing0.5 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now