NSK Japan R8 Single Row Ball Bearings

Min.Order Quantity 1 pcs
Price Negotiable

Product Details

Bearing number618/500 MA
Size (mm)620x500x56
Bore Diameter (mm)620
Outer Diameter (mm)500
Width (mm)56
d500 mm
D620 mm
B56 mm
d1538.1 mm
D1581.49 mm
r1,2 - min.3 mm
da - min.513 mm
Da - max.607 mm
ra - max.2.5 mm
Basic dynamic load rating - C332 kN
Basic static load rating - C0620 kN
Fatigue load limit - Pu11.2 kN
Reference speed1800 r/min
Limiting speed1500 r/min
Calculation factor - kr0.015
Calculation factor - f017
CategorySingle Row Ball Bearing
Inventory0.0
Minimum Buy QuantityN/A
Weight / Kilogram55.289
Product GroupB00308
EnclosureOpen
Precision ClassABEC 1 | ISO P0
Maximum Capacity / Filling SlotNo
Rolling ElementBall Bearing
Snap RingNo
Internal Special FeaturesNo
Cage MaterialBrass
Internal ClearanceC3-Loose
Inch - MetricMetric
Long Description500MM Bore; 620MM Outside Diameter; 56MM Outer Race Diameter; Open; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features
UNSPSC31171504
Harmonized Tariff Code8482.10.50.68
NounBearing
Keyword StringBall
Manufacturer Item Number618/500 MA
Weight / LBS110
Outside Diameter24.409 Inch | 620 Millimeter
Outer Race Width2.205 Inch | 56 Millimeter
Bore19.685 Inch | 500 Millimeter
bore diameter:500 mm
static load capacity:620 kN
outside diameter:620 mm
precision rating:Not Rated
overall width:56 mm
finish/coating:Uncoated
bore type:Round
cage material:Brass
closure type:Open
outer ring width:56 mm
row type & fill slot:Single Row Non-Fill Slot
fillet radius:2.5 mm
snap ring included:Without Snap Ring
maximum rpm:1500 RPM
internal clearance:C0
series:61
dynamic load capacity:332 kN
d1 ≈538.1 mm
D1 ≈581.49 mm
r1,2 min.3 mm
da min.513 mm
Da max.607 mm
ra max.2.5 mm
Basic dynamic load rating C332 kN
Basic static load rating C0620 kN
Fatigue load limit Pu11.2 kN
Calculation factor kr0.015
Calculation factor f017
Mass bearing40.5 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now