Automatic Intermittent Gear pump | AMOII150s | Machine oil | #2072 Pump

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing numberNN 3038 K/SPW33
Size (mm)190x290x75
Bore Diameter (mm)190
Outer Diameter (mm)290
Width (mm)75
d190 mm
D290 mm
B75 mm
d1228.2 mm
E265 mm
b11.3 mm
K6 mm
r1,2 - min.2.1 mm
r3,4 - min.1.1 mm
s3 mm
da - min.201 mm
Da - min.267 mm
Da - max.279 mm
ra - max.2 mm
dn258.9 mm
Basic dynamic load rating - C594 kN
Basic static load rating - C01080 kN
Fatigue load limit - Pu108 kN
Limiting speed for grease lubrication2800 r/min
Limiting speed for oil lubrication3200 mm/min
Gref144 cm
Static radial stiffness (guideline value)4280 N/micron
CategoryCylindrical Roller Bearing
Inventory0.0
Minimum Buy QuantityN/A
Weight / Kilogram17.1
Product GroupB04270
Bore ProfileTapered
Cage MaterialBrass
Precision ClassSpecial Precision
Number of Rows of RollersDouble Row
SeparableOuter Ring - Both Sides
Rolling ElementCylindrical Roller Bearing
ProfileComplete with Outer and Inner Ring
Snap RingNo
Internal ClearanceC1-Tight
RetainerYes
RelubricatableYes
Inch - MetricMetric
Other Features3 Rib Inner Ring | Plain Outer Ring | High Precision Bearing | Cage on Inner Ring OD
Long Description190MM Bore; Tapered Bore Profile; 290MM Outside Diameter; 75MM Width; Brass Cage Matetrial; Special Precision; Double Row; Outer Ring - Both Sides Separable; No Snap Ring; Relubricatable; C1-Tight Int
UNSPSC31171547
Harmonized Tariff Code8482.50.00.00
NounBearing
Manufacturer Item NumberNN 3038 K/SPW33
Weight / LBS38.956
Bore7.48 Inch | 190 Millimeter
Width2.953 Inch | 75 Millimeter
Outside Diameter11.417 Inch | 290 Millimeter
r1,2 min.2.1 mm
r3,4 min.1.1 mm
s max.3 mm
da min.201 mm
Da min.267 mm
Da max.279 mm
Basic dynamic load rating C594 kN
Basic static load rating C01080 kN
Fatigue load limit Pu108 kN
Attainable speed for grease lubrication2800 r/min
Attainable speed for oil-air lubrication3200 r/min
Reference grease quantity Gref144 cm³
Mass bearing17 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now