KP Series Dump Truck Lifting Gear Pumps KP-35B

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing number6219
Size (mm)170x95x32
Bore Diameter (mm)170
Outer Diameter (mm)95
Width (mm)32
d95 mm
D170 mm
B32 mm
d1118.25 mm
D2151.3 mm
r1,2 - min.2.1 mm
da - min.107 mm
Da - max.158 mm
ra - max.2 mm
Basic dynamic load rating - C114 kN
Basic static load rating - C081.5 kN
Fatigue load limit - Pu3 kN
Reference speed8000 r/min
Limiting speed5000 r/min
Calculation factor - kr0.025
Calculation factor - f014.4
CategorySingle Row Ball Bearing
Inventory0.0
Minimum Buy QuantityN/A
Weight / Kilogram2.62
Product GroupB00308
EnclosureOpen
Precision ClassABEC 1 | ISO P0
Maximum Capacity / Filling SlotNo
Rolling ElementBall Bearing
Snap RingNo
Internal Special FeaturesNo
Cage MaterialSteel
Internal ClearanceC0-Medium
Inch - MetricMetric
Long Description95MM Bore; 170MM Outside Diameter; 32MM Outer Race Width; Open; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features; C0-Medium Internal Clearance; Steel Cage
Other FeaturesDeep Groove
UNSPSC31171504
Harmonized Tariff Code8482.10.50.68
NounBearing
Keyword StringBall
Manufacturer Item Number6219
Weight / LBS5.772
Outside Diameter6.693 Inch | 170 Millimeter
Bore3.74 Inch | 95 Millimeter
Outer Race Width1.26 Inch | 32 Millimeter
Inner Race Width0 Inch | 0 Millimeter
bore diameter:95 mm
static load capacity:81.5 kN
outside diameter:170 mm
precision rating:Not Rated
overall width:32 mm
finish/coating:Uncoated
bore type:Round
cage material:Steel
closure type:Open
outer ring width:32 mm
row type & fill slot:Single Row Non-Fill Slot
fillet radius:2 mm
snap ring included:Without Snap Ring
maximum rpm:5000 RPM
internal clearance:C0
series:62
dynamic load capacity:114 kN
d1 ≈118.25 mm
D2 ≈151.3 mm
r1,2 min.2.1 mm
da min.107 mm
Da max.158 mm
ra max.2 mm
Basic dynamic load rating C114 kN
Basic static load rating C081.5 kN
Fatigue load limit Pu3 kN
Calculation factor kr0.025
Calculation factor f014.4
Mass bearing2.63 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now