6332-M-J20B-C3 Insocoat Bearing / Insulated Ball Bearing 160x340x68mm

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

CategoryPillow Block
Inventory2.0
Minimum Buy QuantityN/A
Weight3.84
Product GroupM06110
Number of Mounting Holes2
Mounting MethodSet Screw
Housing Style2 Bolt Pillow Block
Rolling ElementBall Bearing
Housing MaterialCast Iron
Expansion / Non-expansionNon-Expansion
Mounting Bolts5/8 Inch
RelubricatableYes
Insert Part NumberYAR 211-200-2F
SealsSingle Lip Contact
Housing Configuration1 Piece Solid
Inch - MetricInch
Other FeaturesFlinger Seal
Long Description2 Bolt Pillow Block; 2" Bore; 2-1/2" Base to Center Height; Set Screw Mount; Ball Bearing; Relubricatable; Cast Iron; Single Lip Contact; Non-expansion
UNSPSC31171511
Harmonized Tariff Code8483.20.40.40
NounBearing
Keyword StringPillow Block
Weight / LBS8.1585
Bolt Spacing Minimum6.469 Inch | 164.313Millimeter
d2 Inch | 50.8 Millimeter
D2.189 Inch | 55.601 Millimeter
Actual Bolt Center to Center0 Inch | 0Millimeter
Bolt Spacing Maximum6.969 Inch | 177.013Millimeter
Nominal Bolt Center to Center6.7 Inch | 170.2 Millimeter
B2.5 Inch | 63.5 Millimeter
mounting:Two-Bolt Base
finish/coating:Uncoated
bore diameter:2.0000 in
overall width:2-3/16 in
bore type:Round
radial dynamic load capacity:9810 lbf
base to bore centerline:2.5000 in
radial static load capacity:6530 lbf
duty type:Normal Duty
base width:60 mm
housing material:Cast Iron
bolt center-to-center length:171.5 mm
locking device:Set Screw
maximum rpm:3600 RPM
seal type:Contact/Lip
lubrication type:Lubrication Fitting
expansion type:Non-Expansion Bearing (Fixed)
series:SY
overall length:219 mm
replacement bearing:YAR 204-2F
overall height:126 mm
standards met:ISO
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now