2211 Self-Aligning Ball Bearing 55x100x25mm

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing number7201 ACD/HCP4A
Size (mm)32x12x10
Bore Diameter (mm)32
Outer Diameter (mm)12
Width (mm)10
d12 mm
D32 mm
B10 mm
d118.6 mm
d218.6 mm
D125.4 mm
r1,2 - min.0.6 mm
r3,4 - min.0.3 mm
a10.2 mm
da - min.16.2 mm
db - min.16.2 mm
Da - max.27.8 mm
Db - max.29.6 mm
ra - max.0.6 mm
rb - max.0.3 mm
dn20 mm
Basic dynamic load rating - C5.7 kN
Basic static load rating - C02.4 kN
Fatigue load limit - Pu0.104 kN
Limiting speed for grease lubrication56000 r/min
Limiting speed for oil lubrication85000 mm/min
Ball - Dw5.556 mm
Ball - z10
Gref0.507 cm3
Calculation factor - e0.68
Calculation factor - Y21.41
Calculation factor - Y00.76
Calculation factor - X20.67
Calculation factor - Y10.92
Preload class A - GA35 N
Preload class B - GB70 N
Preload class C - GC140 N
Preload class D - GD280 N
Calculation factor - f1.02
Calculation factor - f10.99
Calculation factor - f2A1
Calculation factor - f2B1.01
Calculation factor - f2C1.03
Calculation factor - f2D1.06
Calculation factor - fHC1.01
Preload class A45 N/micron
Preload class B58 N/micron
Preload class C75 N/micron
Preload class D100 N/micron
r1,2 min.0.6 mm
r3,4 min.0.3 mm
da min.16.2 mm
db min.16.2 mm
Da max.27.8 mm
Db max.29.6 mm
ra max.0.6 mm
rb max.0.3 mm
Basic dynamic load rating C5.72 kN
Basic static load rating C02.45 kN
Fatigue load limit Pu0.104 kN
Attainable speed for grease lubrication56000 r/min
Attainable speed for oil-air lubrication85000 r/min
Ball diameter Dw5.556 mm
Number of balls z10
Reference grease quantity Gref0.507 cm³
Preload class A GA35 N
Static axial stiffness, preload class A45 N/µm
Preload class B GB70 N
Static axial stiffness, preload class B58 N/µm
Preload class C GC140 N
Static axial stiffness, preload class C75 N/µm
Preload class D GD280 N
Static axial stiffness, preload class D100 N/µm
Calculation factor f1.02
Calculation factor f10.99
Calculation factor f2A1
Calculation factor f2B1.01
Calculation factor f2C1.03
Calculation factor f2D1.06
Calculation factor fHC1.01
Calculation factor e0.68
Calculation factor (single, tandem) Y20.87
Calculation factor (single, tandem) Y00.38
Calculation factor (single, tandem) X20.41
Calculation factor (back-to-back, face-to-face) Y10.92
Calculation factor (back-to-back, face-to-face) Y21.41
Calculation factor (back-to-back, face-to-face) Y00.76
Calculation factor (back-to-back, face-to-face) X20.67
Mass bearing0.033 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now