UZ217G1P6 Eccentric Bearings

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing number7226 ACD/P4A
Size (mm)130x230x40
Bore Diameter (mm)130
Outer Diameter (mm)230
Width (mm)40
d130 mm
D230 mm
B40 mm
d1162.8 mm
d2162.8 mm
D1199.2 mm
r1,2 - min.3 mm
r3,4 - min.1.1 mm
a62.5 mm
da - min.144 mm
db - min.144 mm
Da - max.216 mm
Db - max.223 mm
ra - max.2.5 mm
rb - max.1 mm
dn170.7 mm
Basic dynamic load rating - C203 kN
Basic static load rating - C0212 kN
Fatigue load limit - Pu6.7 kN
Limiting speed for grease lubrication5600 r/min
Limiting speed for oil lubrication8500 mm/min
Ball - Dw30.162 mm
Ball - z17
Gref72.444 cm3
Calculation factor - e0.68
Calculation factor - Y21.41
Calculation factor - Y00.76
Calculation factor - X20.67
Calculation factor - Y10.92
Preload class A - GA1300 N
Preload class B - GB2600 N
Preload class C - GC5200 N
Preload class D - GD10400 N
Calculation factor - f1.09
Calculation factor - f10.99
Calculation factor - f2A1
Calculation factor - f2B1.01
Calculation factor - f2C1.02
Calculation factor - f2D1.05
Calculation factor - fHC1
Preload class A378 N/micron
Preload class B491 N/micron
Preload class C648 N/micron
Preload class D869 N/micron
r1,2 min.3 mm
r3,4 min.1.1 mm
da min.144 mm
db min.144 mm
Da max.216 mm
Db max.223 mm
ra max.2.5 mm
rb max.1 mm
Basic dynamic load rating C203 kN
Basic static load rating C0212 kN
Fatigue load limit Pu6.7 kN
Attainable speed for grease lubrication5600 r/min
Attainable speed for oil-air lubrication8500 r/min
Ball diameter Dw30.162 mm
Number of balls z17
Reference grease quantity Gref72.444 cm³
Preload class A GA1300 N
Static axial stiffness, preload class A378 N/µm
Preload class B GB2600 N
Static axial stiffness, preload class B491 N/µm
Preload class C GC5200 N
Static axial stiffness, preload class C648 N/µm
Preload class D GD10400 N
Static axial stiffness, preload class D869 N/µm
Calculation factor f1.09
Calculation factor f10.99
Calculation factor f2A1
Calculation factor f2B1.01
Calculation factor f2C1.02
Calculation factor f2D1.05
Calculation factor fHC1
Calculation factor e0.68
Calculation factor (single, tandem) Y20.87
Calculation factor (single, tandem) Y00.38
Calculation factor (single, tandem) X20.41
Calculation factor (back-to-back, face-to-face) Y10.92
Calculation factor (back-to-back, face-to-face) Y21.41
Calculation factor (back-to-back, face-to-face) Y00.76
Calculation factor (back-to-back, face-to-face) X20.67
Mass bearing6.33 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now