HSR30ASS Linear Block 42x90x98mm

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing number71920 CE/HCP4AL
Size (mm)140x100x20
Bore Diameter (mm)140
Outer Diameter (mm)100
Width (mm)20
d100 mm
D140 mm
B20 mm
d1112.4 mm
d2109 mm
D1127.51 mm
b2.3 mm
C110.9 mm
C23 mm
C33.3 mm
r1,2 - min.1.1 mm
r3,4 - min.0.6 mm
a26.7 mm
da - min.106 mm
db - min.103.2 mm
Da - max.134 mm
Db - max.136.8 mm
ra - max.1 mm
rb - max.0.6 mm
dn115.4 mm
Basic dynamic load rating - C39 kN
Basic static load rating - C031.5 kN
Fatigue load limit - Pu1.2 kN
Limiting speed for grease lubrication15500 r/min
Limiting speed for oil lubrication24000 mm/min
Ball - Dw12.7 mm
Ball - z24
Gref10 cm3
Calculation factor - f08.5
Preload class A - GA208 N
Preload class B - GB624 N
Preload class C - GC1250 N
Calculation factor - f1
Calculation factor - f2A1
Calculation factor - f2B1.05
Calculation factor - f2C1.09
Calculation factor - fHC1.01
Preload class A81 N/micron
Preload class B129 N/micron
Preload class C178 N/micron
r1,2 min.1.1 mm
r3,4 min.0.6 mm
da min.106 mm
db min.103.2 mm
Da max.134 mm
Db max.136.8 mm
ra max.1 mm
rb max.0.6 mm
Basic dynamic load rating C39 kN
Basic static load rating C031.5 kN
Fatigue load limit Pu1.2 kN
Attainable speed for grease lubrication15500 r/min
Attainable speed for oil-air lubrication24000 r/min
Ball diameter Dw12.7 mm
Number of balls z24
Reference grease quantity Gref10 cm³
Preload class A GA208 N
Static axial stiffness, preload class A81 N/µm
Preload class B GB624 N
Static axial stiffness, preload class B129 N/µm
Preload class C GC1250 N
Static axial stiffness, preload class C178 N/µm
Calculation factor f1.18
Calculation factor f11
Calculation factor f2A1
Calculation factor f2B1.05
Calculation factor f2C1.09
Calculation factor fHC1.01
Calculation factor f08.5
Mass bearing0.65 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now