22330-2CS5/VT143 Vibrating Screen Bearing 150x320x108mm

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing number729 ACD/HCP4A
Size (mm)26x9x8
Bore Diameter (mm)26
Outer Diameter (mm)9
Width (mm)8
d9 mm
D26 mm
B8 mm
d115.1 mm
d215.1 mm
D120.9 mm
r1,2 - min.0.3 mm
r3,4 - min.0.2 mm
a8.3 mm
da - min.11.4 mm
db - min.11.4 mm
Da - max.23.6 mm
Db - max.24.2 mm
ra - max.0.3 mm
rb - max.0.2 mm
dn16.3 mm
Basic dynamic load rating - C4 kN
Basic static load rating - C01.6 kN
Fatigue load limit - Pu0.067 kN
Limiting speed for grease lubrication70000 r/min
Limiting speed for oil lubrication110000 mm/min
Ball - Dw4.762 mm
Ball - z9
Gref0.258 cm3
Calculation factor - e0.68
Calculation factor - Y21.41
Calculation factor - Y00.76
Calculation factor - X20.67
Calculation factor - Y10.92
Preload class A - GA25 N
Preload class B - GB50 N
Preload class C - GC100 N
Preload class D - GD200 N
Calculation factor - f1.02
Calculation factor - f10.99
Calculation factor - f2A1
Calculation factor - f2B1.01
Calculation factor - f2C1.03
Calculation factor - f2D1.06
Calculation factor - fHC1.01
Preload class A36 N/micron
Preload class B46 N/micron
Preload class C60 N/micron
Preload class D79 N/micron
r1,2 min.0.3 mm
r3,4 min.0.2 mm
da min.11.4 mm
db min.11.4 mm
Da max.23.6 mm
Db max.24.2 mm
ra max.0.3 mm
rb max.0.2 mm
Basic dynamic load rating C3.97 kN
Basic static load rating C01.6 kN
Fatigue load limit Pu0.067 kN
Attainable speed for grease lubrication70000 r/min
Attainable speed for oil-air lubrication110000 r/min
Ball diameter Dw4.762 mm
Number of balls z9
Reference grease quantity Gref0.258 cm³
Preload class A GA25 N
Static axial stiffness, preload class A36 N/µm
Preload class B GB50 N
Static axial stiffness, preload class B46 N/µm
Preload class C GC100 N
Static axial stiffness, preload class C60 N/µm
Preload class D GD200 N
Static axial stiffness, preload class D79 N/µm
Calculation factor f1.02
Calculation factor f10.99
Calculation factor f2A1
Calculation factor f2B1.01
Calculation factor f2C1.03
Calculation factor f2D1.06
Calculation factor fHC1.01
Calculation factor e0.68
Calculation factor (single, tandem) Y20.87
Calculation factor (single, tandem) Y00.38
Calculation factor (single, tandem) X20.41
Calculation factor (back-to-back, face-to-face) Y10.92
Calculation factor (back-to-back, face-to-face) Y21.41
Calculation factor (back-to-back, face-to-face) Y00.76
Calculation factor (back-to-back, face-to-face) X20.67
Mass bearing0.018 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now