WB11066.01 Water Pump Bearing

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing number7034 CD/HCP4A
Size (mm)260x170x42
Bore Diameter (mm)260
Outer Diameter (mm)170
Width (mm)42
d170 mm
D260 mm
B42 mm
d1198.7 mm
d2198.7 mm
D1231.3 mm
r1,2 - min.2.1 mm
r3,4 - min.1.1 mm
a49.9 mm
da - min.181 mm
db - min.181 mm
Da - max.249 mm
Db - max.254 mm
ra - max.2 mm
rb - max.1 mm
dn205.8 mm
Basic dynamic load rating - C212 kN
Basic static load rating - C0245 kN
Fatigue load limit - Pu7.1 kN
Limiting speed for grease lubrication6300 r/min
Limiting speed for oil lubrication10000 mm/min
Ball - Dw26.988 mm
Ball - z22
Gref84 cm3
Calculation factor - f015.9
Preload class A - GA800 N
Preload class B - GB1600 N
Preload class C - GC3200 N
Preload class D - GD6400 N
Calculation factor - f1
Calculation factor - f2A1
Calculation factor - f2B1.02
Calculation factor - f2C1.05
Calculation factor - f2D1.09
Calculation factor - fHC1.02
Preload class A199 N/micron
Preload class B270 N/micron
Preload class C376 N/micron
Preload class D542 N/micron
r1,2 min.2.1 mm
r3,4 min.1.1 mm
da min.181 mm
db min.181 mm
Da max.249 mm
Db max.254 mm
ra max.2 mm
rb max.1 mm
Basic dynamic load rating C212 kN
Basic static load rating C0245 kN
Fatigue load limit Pu7.1 kN
Attainable speed for grease lubrication6300 r/min
Attainable speed for oil-air lubrication10000 r/min
Ball diameter Dw26.988 mm
Number of balls z22
Reference grease quantity Gref84 cm³
Preload class A GA800 N
Static axial stiffness, preload class A199 N/µm
Preload class B GB1600 N
Static axial stiffness, preload class B270 N/µm
Preload class C GC3200 N
Static axial stiffness, preload class C376 N/µm
Preload class D GD6400 N
Static axial stiffness, preload class D542 N/µm
Calculation factor f1.14
Calculation factor f11
Calculation factor f2A1
Calculation factor f2B1.02
Calculation factor f2C1.05
Calculation factor f2D1.09
Calculation factor fHC1.02
Calculation factor f015.9
Mass bearing5.92 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now