Timken JM716649 / JM716610

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing number6212-2RS1/HC5C3WT
Size (mm)110x60x22
Bore Diameter (mm)110
Outer Diameter (mm)60
Width (mm)22
d60 mm
D110 mm
B22 mm
d175.5 mm
D298 mm
da - min.69 mm
da - max.75.4 mm
Da - max.101 mm
ra - max.1.5 mm
Basic dynamic load rating - C55.3 kN
Basic static load rating - C036 kN
Fatigue load limit - Pu1.5 kN
Limiting speed4000 r/min
Calculation factor - kr0.025
Calculation factor - f014.3
CategorySingle Row Ball Bearing
Inventory0.0
Minimum Buy QuantityN/A
Weight / Kilogram0.71
Product GroupB00308
Enclosure2 Seals
Precision ClassABEC 1 | ISO P0
Maximum Capacity / Filling SlotNo
Rolling ElementBall Bearing
Snap RingNo
Internal Special FeaturesSilicon Nitride Rolling Element | Electrical Insulated
Cage MaterialSteel
Enclosure TypeContact Seal
Internal ClearanceC3-Loose
Inch - MetricMetric
Long Description60MM Bore; 110MM Outside Diameter; 22MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; Silicon Nitride Rolling Element | Electrical Insulated Internal Special
Other FeaturesDeep Groove | NBR Seal | Hybrid Silicon Nitride Rolling Element | WT Standard Grease
UNSPSC31171504
Harmonized Tariff Code8482.10.50.68
NounBearing
Keyword StringBall
Weight / LBS0.71
Bore2.362 Inch | 60 Millimeter
Outside Diameter4.331 Inch | 110 Millimeter
Inner Race Width0 Inch | 0 Millimeter
Outer Race Width0.866 Inch | 22 Millimeter
d1 ≈75.5 mm
D2 ≈98 mm
r1,2 min.1.5 mm
da min.69 mm
da max.75.4 mm
Da max.101 mm
ra max.1.5 mm
Basic dynamic load rating C55.3 kN
Basic static load rating C036 kN
Fatigue load limit Pu1.53 kN
Calculation factor kr0.025
Calculation factor f014.3
Mass bearing0.71 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now