Timken NU2224EMA

Min.Order Quantity 1 pcs
Price Negotiable
PDF

Product Details

Bearing number6313N
Size (mm)65x140x33
Bore Diameter (mm)65
Outer Diameter (mm)140
Width (mm)33
d65 mm
D140 mm
B33 mm
C33 mm
rn0,5 mm
a4,9 mm
b3,1 mm
r min.2,1 mm
r0 max.0,6 mm
D1135,23 mm
da min.76 mm
da max86 mm
Da max.129 mm
ra max.2 mm
Dx152 mm
Cy7,3 mm
Cz2,9 mm
Weight2,08 Kg
Basic dynamic load rating (C)92,5 kN
Basic static load rating (C0)60 kN
(Grease) Lubrication Speed4 900 r/min
(Oil) Lubrication Speed5 800 r/min
a min4.65 mm
a max4.9 mm
rs min2.1 mm
rNs min0.5 mm
D3 max135.23 mm
b min3.1 mm
b max3.4 mm
r0 max0.6 mm
Radial clearance classCN
Mass2.08 kg
Dynamic load, C92.5 kN
Static load, C060 kN
Fatigue limit load, Cu2.7 kN
f013.2
Nlim (oil)5,800 rpm
Nlim (grease)4,900 rpm
Min operating temperature, Tmin-20 °C
Max operating temperature, Tmax120 °C
Characteristic cage frequency, FTF0.38 Hz
Characteristic rolling element frequency, BSF4.07 Hz
Characteristic outer ring frequency, BPF03.07 Hz
Characteristic inner ring frequency, BPFI4.93 Hz
da min76 mm
Da max129 mm
ra max2 mm
rNa max0.5 mm
CategorySingle Row Ball Bearing
Inventory0.0
Minimum Buy QuantityN/A
Weight / Kilogram2.13
Product GroupB00308
EnclosureOpen
Precision ClassABEC 1 | ISO P0
Maximum Capacity / Filling SlotNo
Rolling ElementBall Bearing
Snap RingYes
Internal Special FeaturesNo
Cage MaterialSteel
Internal ClearanceC0-Medium
Inch - MetricMetric
Long Description65MM Bore; 140MM Outside Diameter; 33MM Outer Race Width; Open; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; Yes Snap Ring; No Internal Special Features; C0-Medium Internal Clearance; Steel Cage
Other FeaturesDeep Groove | With Snap Ring Groove
UNSPSC31171504
Harmonized Tariff Code8482.10.50.68
NounBearing
Keyword StringBall
Weight / LBS4.885
Outside Diameter5.512 Inch | 140 Millimeter
Outer Race Width1.299 Inch | 33 Millimeter
Bore2.559 Inch | 65 Millimeter
Inner Race Width0 Inch | 0 Millimeter
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now