Front Driver CV Axle Shaft + Wheel Hub Bearing and Assembly + 2 Outer Tie Rods
Min.Order Quantity 1 pcs
Price Negotiable

Product Details

Bearing number7020 ACE/HCP4A
Size (mm)150x100x24
Bore Diameter (mm)150
Outer Diameter (mm)100
Width (mm)24
d100 mm
D150 mm
B24 mm
d1117.38 mm
d2114.2 mm
D1132.61 mm
r1,2 - min.1.5 mm
r3,4 - min.1 mm
a41.4 mm
da - min.107 mm
db - min.107 mm
Da - max.143 mm
Db - max.144.4 mm
ra - max.1.5 mm
rb - max.1 mm
dn120.4 mm
Basic dynamic load rating - C42.3 kN
Basic static load rating - C038 kN
Fatigue load limit - Pu1.4 kN
Limiting speed for grease lubrication12700 r/min
Limiting speed for oil lubrication20000 mm/min
Ball - Dw12.7 mm
Ball - z27
Gref17 cm3
Calculation factor - e0.68
Calculation factor - Y21.41
Calculation factor - Y00.76
Calculation factor - X20.67
Calculation factor - Y10.92
Preload class A - GA390 N
Preload class B - GB1150 N
Preload class C - GC2310 N
Calculation factor - f1.12
Calculation factor - f10.99
Calculation factor - f2A1
Calculation factor - f2B1.03
Calculation factor - f2C1.06
Calculation factor - fHC1.01
Preload class A245 N/micron
Preload class B366 N/micron
Preload class C483 N/micron
r1,2 min.1.5 mm
r3,4 min.1 mm
da min.107 mm
db min.107 mm
Da max.143 mm
Db max.144.4 mm
ra max.1.5 mm
rb max.1 mm
Basic dynamic load rating C42.3 kN
Basic static load rating C038 kN
Fatigue load limit Pu1.43 kN
Attainable speed for grease lubrication12700 r/min
Attainable speed for oil-air lubrication20000 r/min
Ball diameter Dw12.7 mm
Number of balls z27
Reference grease quantity Gref17 cm³
Preload class A GA390 N
Static axial stiffness, preload class A245 N/µm
Preload class B GB1150 N
Static axial stiffness, preload class B366 N/µm
Preload class C GC2310 N
Static axial stiffness, preload class C483 N/µm
Calculation factor f1.12
Calculation factor f10.99
Calculation factor f2A1
Calculation factor f2B1.03
Calculation factor f2C1.06
Calculation factor fHC1.01
Calculation factor e0.68
Calculation factor (single, tandem) Y20.87
Calculation factor (single, tandem) Y00.38
Calculation factor (single, tandem) X20.41
Calculation factor (back-to-back, face-to-face) Y10.92
Calculation factor (back-to-back, face-to-face) Y21.41
Calculation factor (back-to-back, face-to-face) Y00.76
Calculation factor (back-to-back, face-to-face) X20.67
Mass bearing1.12 kg
View more

Company Profile

Distributor Bearing Wholesalers Inc
Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • The Judging Of The Rubber Oil Seal's Merits
    Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Causes Of Overheating Of Motor Bearing And Its Treatment Method
    Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention
    Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...

    • Recommended Products

    Skype Contact Now
    Contact Us