T3300-01 Jaguar S Type - 2 Premium Inner Tie Rod Ends 00-02

Min.Order Quantity 1 pcs
Price Negotiable

Product Details

Bearing number61804-2RS1
Size (mm)32x20x7
Bore Diameter (mm)32
Outer Diameter (mm)20
Width (mm)7
d20 mm
D32 mm
B7 mm
d123.85 mm
D229.4 mm
da - min.22 mm
da - max.23.6 mm
Da - max.30 mm
ra - max.0.3 mm
Basic dynamic load rating - C4 kN
Basic static load rating - C02.3 kN
Fatigue load limit - Pu0.104 kN
Limiting speed13000 r/min
Calculation factor - kr0.015
Calculation factor - f014.5
CategorySingle Row Ball Bearing
Inventory2.0
Minimum Buy QuantityN/A
Weight / Kilogram0.02
Product GroupB00308
Enclosure2 Seals
Precision ClassABEC 1 | ISO P0
Maximum Capacity / Filling SlotNo
Rolling ElementBall Bearing
Snap RingNo
Internal Special FeaturesNo
Cage MaterialSteel
Enclosure TypeContact Seal
Internal ClearanceC0-Medium
Inch - MetricMetric
Long Description20MM Bore; 32MM Outside Diameter; 7MM Outer Race Diameter; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features
UNSPSC31171504
Harmonized Tariff Code8482.10.50.68
NounBearing
Keyword StringBall
Manufacturer Item Number61804 -2RS1/LHT23
Weight / LBS0.04
Outside Diameter1.26 Inch | 32 Millimeter
Outer Race Width0.276 Inch | 7 Millimeter
Bore0.787 Inch | 20 Millimeter
bore diameter:20 mm
static load capacity:2.32 kN
outside diameter:32 mm
precision rating:Not Rated
overall width:7 mm
finish/coating:Uncoated
bore type:Round
cage material:Steel
closure type:Double Sealed
outer ring width:7 mm
row type & fill slot:Single Row Non-Fill Slot
fillet radius:0.3 mm
internal clearance:C0
maximum rpm:13000 RPM
operating temperature range:-40 to +210 °F
series:61
dynamic load capacity:4.03 kN
d1 ≈23.85 mm
D2 ≈29.4 mm
r1,2 min.0.6 mm
da min.22 mm
da max.23.6 mm
Da max.30 mm
ra max.0.3 mm
Basic dynamic load rating C4.03 kN
Basic static load rating C02.32 kN
Fatigue load limit Pu0.104 kN
Calculation factor kr0.015
Calculation factor f014.5
Mass bearing0.018 kg
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now