Wheel Bearing and Hub Assembly Front/Rear ACDelco GM Original Equipment FW435
Min.Order Quantity 1 pcs
Price Negotiable

Product Details

Bearing number71920 ACE/P4A
Size (mm)140x100x20
Bore Diameter (mm)140
Outer Diameter (mm)100
Width (mm)20
d100 mm
D140 mm
B20 mm
d1112.4 mm
d2109 mm
D1127.51 mm
r1,2 - min.1.1 mm
r3,4 - min.0.6 mm
a39.2 mm
da - min.106 mm
db - min.103.2 mm
Da - max.134 mm
Db - max.136.8 mm
ra - max.1 mm
rb - max.0.6 mm
dn115.4 mm
Basic dynamic load rating - C36.4 kN
Basic static load rating - C030 kN
Fatigue load limit - Pu1.1 kN
Limiting speed for grease lubrication11500 r/min
Limiting speed for oil lubrication18000 mm/min
Ball - Dw12.7 mm
Ball - z24
Gref10 cm3
Calculation factor - e0.68
Calculation factor - Y21.41
Calculation factor - Y00.76
Calculation factor - X20.67
Calculation factor - Y10.92
Preload class A - GA332 N
Preload class B - GB996 N
Preload class C - GC1990 N
Calculation factor - f1.18
Calculation factor - f10.99
Calculation factor - f2A1
Calculation factor - f2B1.04
Calculation factor - f2C1.07
Calculation factor - fHC1
Preload class A187 N/micron
Preload class B280 N/micron
Preload class C367 N/micron
r1,2 min.1.1 mm
r3,4 min.0.6 mm
da min.106 mm
db min.103.2 mm
Da max.134 mm
Db max.136.8 mm
ra max.1 mm
rb max.0.6 mm
Basic dynamic load rating C36.4 kN
Basic static load rating C030 kN
Fatigue load limit Pu1.14 kN
Attainable speed for grease lubrication11500 r/min
Attainable speed for oil-air lubrication18000 r/min
Ball diameter Dw12.7 mm
Number of balls z24
Reference grease quantity Gref10 cm³
Preload class A GA332 N
Static axial stiffness, preload class A187 N/µm
Preload class B GB996 N
Static axial stiffness, preload class B280 N/µm
Preload class C GC1990 N
Static axial stiffness, preload class C367 N/µm
Calculation factor f1.18
Calculation factor f10.99
Calculation factor f2A1
Calculation factor f2B1.04
Calculation factor f2C1.07
Calculation factor fHC1
Calculation factor e0.68
Calculation factor (single, tandem) Y20.87
Calculation factor (single, tandem) Y00.38
Calculation factor (single, tandem) X20.41
Calculation factor (back-to-back, face-to-face) Y10.92
Calculation factor (back-to-back, face-to-face) Y21.41
Calculation factor (back-to-back, face-to-face) Y00.76
Calculation factor (back-to-back, face-to-face) X20.67
Mass bearing0.77 kg
View more

Company Profile

Distributor Bearing Wholesalers Inc
Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • The Judging Of The Rubber Oil Seal's Merits
    Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Causes Of Overheating Of Motor Bearing And Its Treatment Method
    Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention
    Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...

    • Recommended Products

    Skype Contact Now
    Contact Us