TRIUMPH 500 T100C T100R CAM FOLLOWER SET FOR UNIT 500 TWINS GOOD PADS AND SHANKS

Min.Order Quantity 1 pcs
Price Negotiable

Product Details

CategoryPillow Block
Inventory0.0
Minimum Buy QuantityN/A
Weight19.52
Product GroupM06288
Number of Mounting Holes2
Mounting MethodShaft Mount
Housing Style2 Bolt Pillow Block
Rolling ElementSpherical Roller Bearing
Housing MaterialCast Iron
Expansion / Non-expansionNon-expansion
Mounting Bolts3/4 Inch
RelubricatableYes
Insert Part Number22217
SealsTriple Ring Labyrinth
Housing Configuration2 Piece Split
Inch - MetricInch
Other FeaturesDouble Row | Straight Bore
Long Description2 Bolt Pillow Block; 3.347" Bore; 3-3/4" Base to Center Height; Shaft Mount Mount; Spherical Roller Bearing; 9-7/8" Minimum Bolt Spacing; 11" Bolt Spacing Maximum; Relubricatable;
UNSPSC31171511
Harmonized Tariff Code8483.20.40.80
NounBearing
Keyword StringPillow Block
Manufacturer Item NumberSAF 22217
Weight / LBS43
Nominal Bolt Center to Center10.4 Inch | 264.2 Millimeter
Bolt Spacing Maximum11 Inch | 279.4Millimeter
Bolt Spacing Minimum9.875 Inch | 250.83Millimeter
Actual Bolt Center to Center0 Inch | 0Millimeter
d3.347 Inch | 85.014 Millimeter
B13.000 in
D1.25 in
Bearing Number22217
Diameter S-23 15/16 in
Diameter S-33 3/16 in
A3.75 in
C3.500 in
E Max.11.0000 in
E Min.9.8750 in
H17.250 in
Oil Level K1.4375 in
L24.938 in
Y1.4219 in
No. of Base Bolts Required2
Size of Base Bolts Required3.4 in
LocknutAN17
LockwasherW17
Housing Only3SAF217
Bolt Hole Length1.3125 in
Bolt Hole Width0.750 in
Stabilizing Ring 1 Req’d4SR-17-14
Triple Seal 2 Req’d at S-2LOR89
Triple Seal 2 Req’d at S-3LOR63
Assembly Weight43 lb
Full Timken Part NumberSAF22217
Seal TypeTriple Ring Seal
View more

Company Profile

Worktime З понеділка по п'ятницю: з 9:00 до 18:00
Phone 00(65) 6258 1688
View more

Related News

  • Y-Bearings Qualified products shall meet the following conditions: 1, the end face of the code identification and need to match. 2, smooth surface, no defect, no deformation. 3, with the skeleton of the rubber seal shape, the end face is...
  • Y-Bearings First, the concept of bearing overheating: In general, bearing overheating refers to the rolling bearing temperature rise of more than 55 ℃, sliding bearing temperature rise of more than 40 ℃. Second, the motor bearing overheating...
  • Drilling Pump Bearing Failure Analysis And Prevention from Distributor Bearing Wholesalers Inc Drilling pumps are widely used in oil drilling and gas field, known as the heart of the rig, the event of failure, the drilling...
  • Recommended Products

    Skype Contact Now