| da |
65 mm |
| db |
77.787 mm |
| dc |
61.913 mm |
| Da |
140 mm |
| Ca |
57.785 mm |
| A1 |
88.9 mm |
| A2 |
209.55 mm |
| S |
4.763 mm |
| ba |
40.481 mm |
| H |
167.481 mm |
| H1 |
88.9 mm |
| H2 |
31.75 mm |
| J min. |
244.475 mm |
| J max. |
279.4 mm |
| L |
330.2 mm |
| N1 |
22.225 mm |
| R1 |
53.181 mm |
| R2 |
21.431 mm |
| RG |
3/8 NPT |
| PG |
1/8 NPT |
| h |
35.719 mm |
| Housing |
SAF 313 |
| Stabilizing ring |
SR-16-13 |
| Taconite seal (db shaft position) |
TER 55 |
| Taconite seal (dc shaft position) |
TER 37 |
| End plug (suffix Y) |
EPR 7 |
| Max. speed for Taconite seal |
1000 r/min |
| P60° |
83.2 kN |
| P90° |
49.8 kN |
| P120° |
30.2 kN |
| P150° |
26.7 kN |
| P180° |
31.6 kN |
| Pa |
20.5 kN |
| Mass pillow block |
16 kg |
| Cap bolt |
2 x 5/8-11 UNC |
| Cap bolt recommended tightening torque |
298.3 N·m |
| Cap bolt, SAE grade |
8 |
| Appropriate attachment bolt size G |
0.75 in |
| Initial grease fill |
87.885 g |