| da |
61.913 mm |
| Da |
160 mm |
| Ca |
64.795 mm |
| A1 |
98.425 mm |
| A2 |
223.838 mm |
| ba |
35.719 mm |
| H |
192.088 mm |
| H1 |
101.6 mm |
| H2 |
41.275 mm |
| J min. |
263.525 mm |
| J max. |
295.275 mm |
| L |
349.25 mm |
| N1 |
22.225 mm |
| R1 |
60.325 mm |
| R2 |
27.94 mm |
| RG |
3/8 NPT |
| PG |
1/8 NPT |
| h |
42.862 mm |
| Housing |
SAF 615 |
| Stabilizing ring |
2 x SR-1615 |
| Taconite seal |
TER 37 |
| End plug (suffix Y) |
EPR 7 |
| Max. speed for Taconite seal |
1250 r/min |
| P60° |
121 kN |
| P90° |
72.5 kN |
| P120° |
45.4 kN |
| P150° |
40.5 kN |
| P180° |
49.8 kN |
| Pa |
8.27 kN |
| Mass pillow block |
21.5 kg |
| Cap bolt |
2 x 5/8-11 UNC |
| Cap bolt recommended tightening torque |
298.3 N·m |
| Cap bolt, SAE grade |
8 |
| Appropriate attachment bolt size G |
0.75 in |
| Initial grease fill |
286.33 g |