| da |
85.725 mm |
| Da |
180 mm |
| Ca |
70.104 mm |
| A1 |
111.125 mm |
| A2 |
222.25 mm |
| S |
4.763 mm |
| ba |
51.594 mm |
| H |
222.25 mm |
| H1 |
114.3 mm |
| H2 |
44.45 mm |
| J min. |
295.275 mm |
| J max. |
333.375 mm |
| J1 |
60.325 mm |
| L |
387.35 mm |
| N1 |
22.225 mm |
| R1 |
65.088 mm |
| R2 |
30.163 mm |
| RG |
3/8 NPT |
| PG |
1/4 NPT |
| h |
42.069 mm |
| Housing |
SAW 520 |
| Bearing |
23220 CCK/W33 |
| Stabilizing ring |
SR-20-17 |
| Taconite seal |
2 x TER 101 |
| End plug (suffix Y) |
EPR 12 |
| Max. speed for Taconite seal |
900 r/min |
| P60° |
119 kN |
| P90° |
71.2 kN |
| P120° |
44.5 kN |
| P150° |
40 kN |
| P180° |
48.9 kN |
| Pa |
18.1 kN |
| Mass pillow block |
34 kg |
| Cap bolt |
2 x 3/4-10 UNC |
| Cap bolt recommended tightening torque |
515.2 N·m |
| Cap bolt, SAE grade |
8 |
| Appropriate attachment bolt size G |
0.75 in |
| Initial grease fill |
181.44 g |