| da |
65 mm |
| db |
77.787 mm |
| dc |
61.913 mm |
| Da |
120 mm |
| Ca |
39.014 mm |
| A1 |
79.375 mm |
| A2 |
112.713 mm |
| S |
3.969 mm |
| ba |
31.75 mm |
| H |
147.637 mm |
| H1 |
76.2 mm |
| H2 |
25.4 mm |
| J min. |
206.375 mm |
| J max. |
241.3 mm |
| L |
279.4 mm |
| N1 |
19.05 mm |
| R1 |
44.45 mm |
| R2 |
15.875 mm |
| RG |
1/8 NPT |
| PG |
1/8 NPT |
| h |
27.781 mm |
| Housing |
SAF 213 |
| Stabilizing ring |
SR-13-0 |
| Labyrinth ring (db shaft position) |
LOR 55 |
| Labyrinth ring (dc shaft position) |
LOR 37 |
| End plug (suffix Y) |
EPR 7 |
| Bearing limiting speed |
7000 r/min |
| P60° |
50.3 kN |
| P90° |
30.2 kN |
| P120° |
18 kN |
| P150° |
16 kN |
| P180° |
19.1 kN |
| Pa |
12 kN |
| Mass pillow block |
9.98 kg |
| Cap bolt |
2 x 1/2-13 UNC |
| Cap bolt recommended tightening torque |
81.3 N·m |
| Cap bolt, SAE grade |
5 |
| Appropriate attachment bolt size G |
0.625 in |
| Initial grease fill |
53.865 g |