| da |
36.513 mm |
| Da |
85.001 mm |
| Ca |
28.804 mm |
| A1 |
60.325 mm |
| A2 |
88.9 mm |
| S |
4.763 mm |
| ba |
22.225 mm |
| H |
112.713 mm |
| H1 |
57.15 mm |
| H2 |
20.637 mm |
| J min. |
158.75 mm |
| J max. |
177.8 mm |
| L |
209.55 mm |
| N1 |
15.875 mm |
| R1 |
28.575 mm |
| R2 |
12.7 mm |
| RG |
1/8 NPT |
| PG |
1/8 NPT |
| h |
25.4 mm |
| Housing |
SAF 509 |
| Stabilizing ring |
SR-9-0 |
| Contact seal |
2 x B9784-12 |
| Ventilation fitting |
38174-12 |
| End plug (suffix Y) |
EPR 3 |
| Max. speed for contact seal |
4000 r/min |
| P60° |
20.9 kN |
| P90° |
12.5 kN |
| P120° |
7.56 kN |
| P150° |
6.67 kN |
| P180° |
8.01 kN |
| Pa |
2.54 kN |
| Mass pillow block |
5.17 kg |
| Cap bolt |
2 x 7/16-14 UNC |
| Cap bolt recommended tightening torque |
61 N·m |
| Cap bolt, SAE grade |
5 |
| Appropriate attachment bolt size G |
0.5 in |
| Initial grease fill |
51.03 g |