| da |
180 mm |
| db |
114.3 mm |
| dc |
96.838 mm |
| Da |
180 mm |
| Ca |
70.104 mm |
| A1 |
111.125 mm |
| A2 |
173.037 mm |
| S |
4.763 mm |
| ba |
52.388 mm |
| H |
222.25 mm |
| H1 |
114.3 mm |
| H2 |
44.45 mm |
| J min. |
295.275 mm |
| J max. |
333.375 mm |
| J1 |
60.325 mm |
| L |
387.35 mm |
| N1 |
22.225 mm |
| R1 |
65.088 mm |
| R2 |
30.163 mm |
| RG |
3/8 NPT |
| PG |
1/4 NPT |
| h |
60.325 mm |
| Housing |
SAW 220 |
| Stabilizing ring |
SR-20-17 |
| Labyrinth ring (db shaft position) |
LOR 118 |
| PosiTrac Plus contact element (db shaft position) |
B10724-117 |
| Labyrinth ring (dc shaft position) |
LOR 106 |
| PosiTrac Plus contact element (dc shaft position) |
B10724-106 |
| End plug (suffix Y) |
EPR 12 |
| Max. speed for PosiTrac Plus seal |
1300 r/min |
| P60° |
104 kN |
| P90° |
62.3 kN |
| P120° |
39.1 kN |
| P150° |
35.6 kN |
| P180° |
42.3 kN |
| Pa |
18.1 kN |
| Mass pillow block |
34.5 kg |
| Cap bolt |
2 x 3/4-10 UNC |
| Cap bolt recommended tightening torque |
515.2 N·m |
| Cap bolt, SAE grade |
8 |
| Appropriate attachment bolt size G |
0.75 in |
| Initial grease fill |
181.44 g |